Page 2
NTELLECTUAL ROPERTY IGHTS Wren maintains certain intellectual property rights that may pertain to this product. To see a list of our patents, please refer to our RADEMARK CKNOWLEDGMENTS Wren®. the Wren logo, Hyperion® and the Hyperion logo are trademarks of Wren. The trademarks that are followed by ® are registered trademarks in the U.S.
Page 3
OMPONENT Prior to installation, verify that all hardware is included. If there are missing components, please contact Wren. Speaker Mounting Hardware EQUIRED OOLS AND CCESSORIES Drill Cables (18/2 AWG min.) Wrench #2 Phillips screwdriver NOTE: A DDITIONAL MOUNTING HARDWARE MAY BE REQUIRED...
Page 4
1—W ECTION EILING OUNT DENTIFY AN APPROPRIATE MOUNTING LOCATION Mounting Surface The HYP-SPK15-W should be mounted to a structurally solid wall or ceiling surface. Mounting Height The minimum recommended mounting height for this device is 8’ from ground level. Mounting Hardware Use appropriate mounting hardware based on the mounting surface.
Page 5
ONNECT SPEAKER WIRES Install the liquid tight cable gland (provided) and attach the speaker wires to the speaker, making sure to note polarity. NOTE: W 18 AWG E RECOMMEND USING WIRE OR LARGER AND A MAXIMUM RUN OF FEET IN ORDER TO MAINTAIN AUDIO VOLUME AND CLARITY ONNECT ATEWAY...
Page 6
2—H MSE M ECTION YPERION OUNT TTACH SPEAKER TO Attach the speaker to the top of the MSE using the provided hardware. TTACH THE CORD GRIP Attach the cord grip to the speaker wire and mount the cord grip to the MSE. Cord Grip ABLING Cable Access...
Page 7
ONNECT SPEAKER WIRES Connect the speaker wire to the speaker inside the MSE, making sure to note polarity. Secure the connections using crimp connections or wire nuts. NOTE: W 18 AWG E RECOMMEND USING WIRE OR LARGER AND A MAXIMUM RUN OF FEET IN ORDER TO MAINTAIN AUDIO VOLUME AND CLARITY ONNECT...
Need help?
Do you have a question about the Hyperion HYP-SPK15-W and is the answer not in the manual?
Questions and answers