WAGO PERSPECTO 762 Manual
  1. Manuals
  2. Brands
  3. WAGO Manuals
  4. Control Panel
  5. WAGO-PERSPECTO 762 Series
  6. Manual

WAGO PERSPECTO 762 Manual

Web panel
Hide thumbs Also See for PERSPECTO 762:
Table of Contents

Advertisement

Quick Links

Download this manual
WAGO-PERSPECTO® 762
Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1
Manual
762-1057
WP 57 QVGA
PERSPECTO® WP - Web Panel
Version 1.4.0
Pos : 3 /Alle Serien (Allgemeine M odul e)/Rec htlic hes, Allgemei nes/Impressum für Standardhandbüc her - allg. Angaben, Ansc hriften, T elefonnummer n und E-Mail-Adres sen @ 3\mod_1219151118203_21.doc x @ 21060 @ @ 1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the PERSPECTO 762 and is the answer not in the manual?

Questions and answers

Related Manuals for WAGO PERSPECTO 762

Summary of Contents for WAGO PERSPECTO 762

  • Page 1 WAGO-PERSPECTO® 762 Pos : 2 /D okumentati on allgemein/Ei nband/Ei nband H andbuch - Fronts eite 2015 - mit Doc Variabl en (Standar d) @ 9\mod_1285229289866_0.doc x @ 64941 @ @ 1 Manual 762-1057 WP 57 QVGA PERSPECTO® WP - Web Panel Version 1.4.0...
  • Page 2 WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA © 2016 by WAGO Kontakttechnik GmbH & Co. KG All rights reserved. WAGO Kontakttechnik GmbH & Co. KG Hansastraße 27 D-32423 Minden Phone: +49 (0) 571/8 87 – 0 Fax: +49 (0) 571/8 87 – 1 69 E-Mail: info@wago.com...

  • Page 3: Table Of Contents

    WAGO-PERSPECTO® 762 Table of Contents 762-1057 WP 57 QVGA Pos : 5 /D okumentati on allgemein/Verzeic hnisse/Inhalts verz eichnis - Ü berschrift oG und Verzei chnis @ 3\mod_1219151230875_21.doc x @ 21063 @ @ 1 Table of Contents Notes about this Documentation ..............5 Scope of Validity ..................
  • Page 4 6.2.2 Setting the IP Address ................ 31 6.2.3 IP Address ..................32 The WAGO Control Center ..............33 6.3.1 Starting the WAGO Control Center ........... 33 6.3.2 “General” Tab ..................34 6.3.3 “Autostart Applications” Tab ............. 35 6.3.4 “Users” Tab ..................36 6.3.5...

  • Page 5: Notes About This Documentation

    Reproduction, translation, electronic and phototechnical filing/archiving (e.g., photocopying) as well as any amendments require the written consent of WAGO Kontakttechnik GmbH & Co. KG, Minden, Germany. Non-observance will involve the right to assert damage claims. Pos : 11.3 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.4.0...

  • Page 6: Symbols

    Notes about this Documentation WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Pos : 11.4 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/N eue Ü berschriften/Ebene 2Symbol e - Ü bersc hrift 2 @ 13\mod_1351068042408_21.doc x @ 105270 @ 2 @ 1 Symbols Pos : 11.5.1 /All e Serien ( Allgemei ne Module)/Sicherheits- und sons tige Hi nweis e/Gefahr/Gefahr: _War nung vor Pers onenschäden allgemei n_ - Erläuter ung @ 13\mod_1343309450020_21.doc x @ 101029 @ @ 1...
  • Page 7 WAGO-PERSPECTO® 762 Notes about this Documentation 762-1057 WP 57 QVGA Additional Information: Refers to additional information which is not an integral part of this documentation (e.g., the Internet). Pos : 11.6 /Dokumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.4.0...

  • Page 8: Number Notation

    Pos : 11.10 /Alle Serien (Allgemeine M odul e)/Rechtliches, Allgemeines/Sc hriftkonventi onen @ 3\mod_1221059521437_21.doc x @ 21714 @ @ 1 Table 2: Font Conventions Font Type Indicates italic Names of paths and data files are marked in italic-type. e.g.: C:\Program Files\WAGO Software Menu Menu items are marked in bold letters. e.g.: Save >...

  • Page 9: Important Notes

    2.1.1 Subject to Changes WAGO Kontakttechnik GmbH & Co. KG reserves the right to provide for any alterations or modifications that serve to increase the efficiency of technical progress. WAGO Kontakttechnik GmbH & Co. KG owns all rights arising from the granting of patents or from the legal protection of utility patents.
  • Page 10 Please send your request for modified and new hardware or software configurations directly to WAGO Kontakttechnik GmbH & Co. KG. Pos : 14.7 /Serie 762 (PERSPEC TO und e!DISPLAY)/Wichtige Erläuter ungen/Sic herheits hinweise/Hinweis/Hi nweis : Pi xelfehler i m T FT-Displ ay @ 10\mod_1306840913476_21.doc x @ 73481 @ @ 1...

  • Page 11: Safety Advice (Precautions)

    WAGO-PERSPECTO® 762 Important Notes 762-1057 WP 57 QVGA Pos : 14.9 /All e Seri en ( Allgemei ne Module)/Ü bers chriften/N eue Ü berschriften/Ebene 2Sicher heits hi nweis e - Ü berschrift 2 @ 6\mod_1260180299987_21.doc x @ 46724 @ 2 @ 1 Safety Advice (Precautions) Pos : 14.10 /Alle Serien (Allgemeine D okumente) (Allgemeine M odul e)/Wichtige Erläuterungen/Sic herheits hinweise/Ei nleitung Sic herheits hinweise Har dwar e @ 6\mod_1260180170493_21.doc x @ 46720 @ @ 1...
  • Page 12 Important Notes WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Do not use any contact spray! Do not use any contact spray. The spray may impair contact area functionality in connection with contamination. Pos : 14.12.5 /Alle Serien (Allgemeine M odul e)/Sic herheits- und s onstige Hinweise/Achtung/Ac htung: Nic ht i n T elekommuni kati ons netz en ei ns etz en! (Z usatz RJ- 45) @ 3\mod_1224065187468_21.doc x @ 24076 @ @ 1 Do not use in telecommunication circuits! Only use devices equipped with ETHERNET or RJ-45 connectors in LANs.

  • Page 13: Characteristics Of The Codesys Web Visualization

    The CODESYS Web visualization contains some limitations and particularities. In connection with the Web panel, the following description must be observed for continuous operation: To use this file with the WAGO Web panel, the call for the function "CookieHandling()" is disabled.

  • Page 14: Description Of The Function "Cookiehandling()

    Important Notes WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Response time depends on the number, type and form of the objects displayed This device has been designed for presentation of simple CODESYS Web visualizations. The device establishes communication with a controller (e.g. from the series 750-88x or 758-8xx) and displays the visualization pages stored there.

  • Page 15: Device Description

    Pos : 19 /Serie 762 (PERSPEC TO und e!DISPLAY)/Gerätebesc hreibung/Eigensc haften/Ei nlei tung der Bes chr eibung/Ger ätebesc hrei bung 0762- xxxx allgemein @ 9\mod_1294144990053_21.doc x @ 67820 @ @ 1 The 762 Series panels are used to operate and visualize the controllers of the WAGO-I/O-SYSTEM. The integrated WAGO-AUTOMATION COCKPIT development environment is used to program the panels and controllers.

  • Page 16: View

    Device Description WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Pos : 22 /All e Seri en (Allgemei ne Module)/Ü berschriften/N eue Ü berschriften/Ebene 2Ansicht - Ü bersc hrift 2 @ 4\mod_1240984217343_21.doc x @ 31958 @ 2 @ 1 View Pos : 23 /Serie 762 (PERSPEC TO und e!DISPLAY)/Gerätebesc hreibung/Eigensc haften/Ansic ht/Frontansic ht 0762- x057/xxxx- xxxx @ 9\mod_1294145233531_21.doc x @ 67823 @ 3 @ 1 3.2.1...

  • Page 17: Back View

    WAGO-PERSPECTO® 762 Device Description 762-1057 WP 57 QVGA Pos : 25 /Serie 762 (PERSPEC TO und e!DISPLAY)/Gerätebesc hreibung/Eigensc haften/Ansic ht/R üc kansic ht 0762-1057 @ 10\mod_1313592168717_21.doc x @ 77214 @ 3 @ 1 3.2.2 Back View Figure 2: Back View Table 4: Legend for Figure “Back View”...

  • Page 18: Connectors

    Device Description WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Pos : 27 /All e Seri en (Allgemei ne Module)/Ü berschriften/N eue Ü berschriften/Ebene 2Anschl üss e - Ü berschrift 2 @ 4\mod_1240984262656_21.doc x @ 31961 @ 2 @ 1 Connectors Pos : 28.1 /Serie 762 (PERSPEC TO und e!DISPLAY)/Gerätebesc hreibung/Eigensc haften/Ansc hlüsse/Ansc hluss X1 – Versorgungss pannung @ 9\mod_1294223878130_21.doc x @ 67929 @ 3 @ 1 3.3.1...

  • Page 19: X6 - Ethernet Interface

    WAGO-PERSPECTO® 762 Device Description 762-1057 WP 57 QVGA Pos : 28.3 /Serie 762 (PERSPEC TO und e!DISPLAY)/Gerätebesc hreibung/Eigensc haften/Ansc hlüsse/Ansc hluss X6 - ETH ERNET-Sc hnittstelle 10/100 M Bit @ 9\mod_1294225066866_21.doc x @ 67949 @ 3 @ 1 3.3.2 X6 – ETHERNET Interface An RJ45 jack is used for the ETHERNET interface.

  • Page 20: X8/X9 - Usb Interfaces

    Device Description WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Pos : 28.5 /Serie 762 (PERSPEC TO und e!DISPLAY)/Gerätebesc hreibung/Eigensc haften/Ansc hlüsse/Ansc hluss X8/X9 - U SB- Schnittstellen T yp A @ 9\mod_1294225243422_21.doc x @ 67953 @ 3 @ 1 3.3.3 X8/X9 – USB Interfaces The interfaces are designed as USB host interfaces, type A.

  • Page 21: Battery Case

    WAGO-PERSPECTO® 762 Device Description 762-1057 WP 57 QVGA Pos : 30 /All e Seri en (Allgemei ne Module)/Ü berschriften/N eue Ü berschriften/Ebene 2Batteriefac h - Ü bers chrift 2 @ 9\mod_1296045996505_21.doc x @ 68960 @ 2 @ 1 Battery Case Pos : 31 /Serie 762 (PERSPEC TO und e!DISPLAY)/Gerätebesc hreibung/Eigensc haften/Batteri efach/Batteriefac h CR 1/2AA / Z 3600A @ 9\mod_1294745081377_21.doc x @ 68154 @ @ 1...

  • Page 22: Slot For Memory Card

    The panel 762-1057 is equipped with a Flash memory slot on the side for an SD card. It supports cards with a 2 GB maximum. Supported memory cards (item no. 758-879/000-001) are available from WAGO. Pos : 35 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.4.0...

  • Page 23: Operating Elements

    3.6.1 Service Button The service switch on the back of the device is used to call up the Windows CD desktop. The WAGO Control Center can be launched, for example, to configure the device. Figure 7: Service Button Pos : 38 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.4.0...

  • Page 24: Technical Data

    Device Description WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Pos : 39 /All e Seri en (Allgemei ne Module)/Ü berschriften/N eue Ü berschriften/Ebene 2T ec hnis che D aten - Ü bersc hrift 2 @ 3\mod_1232967587687_21.doc x @ 26924 @ 2 @ 1 Technical Data Pos : 40 /Serie 762 (PERSPEC TO und e!DISPLAY)/Gerätebesc hreibung/Eigensc haften/T echnisc he Daten/T ec hnis che D aten 0762- 1057 @ 9\mod_1295596181156_21.doc x @ 68594 @ 333333 @ 1...

  • Page 25: Hardware

    WAGO-PERSPECTO® 762 Device Description 762-1057 WP 57 QVGA 3.7.4 Hardware Table 11: Technical Data ‒ Hardware Processor 32 Bit ARM9 200 MHz RAM / Flash / SRAM 64 Mbyte / 64 Mbyte / 1 Mbyte Memory expansion SD-Card (max. 2 GB) 3.7.5...

  • Page 26: Approvals

    Device Description WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Pos : 42 /All e Seri en (Allgemei ne Module)/Ü berschriften/N eue Ü berschriften/Ebene 2Z ul assungen - Ü berschrift 2 @ 3\mod_1224055364109_21.doc x @ 24030 @ 2 @ 1 Approvals Pos : 43 /Serie 762 (PERSPEC TO und e!DISPLAY)/Gerätebesc hreibung/Eigensc haften/Z ulass ungen/Z ulass ungen Panel 762- xxxx/xxxx- xxxx Allgemein, ohne Variantenangabe - Ei nleitung @ 9\mod_1294226972032_21.doc x @ 67917 @ @ 1 The following approvals have been granted to 762-1057 panels: Pos : 44.1 /All e Seri en ( Allgemei ne Dokumente) ( Allgemei ne Module)/Z ulassungen/Standardz ulassungen/C E (Konformi täts kennz eichnung) @ 3\mod_1224494777421_21.doc x @ 24276 @ @ 1...

  • Page 27: Mounting

    The operating temperature ranges specified in the technical data apply to the recommended mounting position. If the panel is mounted in a position different than recommended, cooling can be affected. Contact WAGO Service for more information. The PERSPECTO Series panels are used in the panel cutout provided and bolted down with the included clamping elements and the intermediate plate from behind (note the following installation diagram).

  • Page 28: Figure 9: Detailed Photograph Of Installation With Intermediate Plate

    Mounting WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Figure 9: Detailed Photograph of Installation with Intermediate Plate Information on the dimensions of the panel cutout is available in the Technical Data section. Pos : 56 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1 Manual Version 1.4.0...

  • Page 29: Connect Devices

    WAGO-PERSPECTO® 762 Connect Devices 762-1057 WP 57 QVGA Pos : 57 /All e Seri en (Allgemei ne Module)/Ü berschriften/N eue Ü berschriften/Ebene 1Ger äte anschli eßen - Ü berschrift 1 @ 3\mod_1234172889468_21.doc x @ 27460 @ 1 @ 1 Connect Devices Pos : 58.1 /Serie 762 (PERSPEC TO und e!DISPLAY)/Ansc hließ...

  • Page 30: Commissioning

    The service switch on the back of the device can be used to launch the Windows CE desktop at any time. The WAGO Control Center can be used to change the start behavior of the device. Time window for launching the Windows CE desktop! The WAGO Control Center can be used to set the time window for launching the Windows CE desktop after the boot and self-test phase.

  • Page 31: Ip Address Of The Device

    Therefore, a TCP/IP connection is required. An IP address must be assigned to the device after switching it on for the first time. The WAGO Control Center installed on the device is used to assign the IP address by default (observe "Setting the IP Address" section).

  • Page 32: Ip Address

    Commissioning WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Figure 10: IP Address Pos : 63.5 /Serie 762 (PERSPEC TO und e!DISPLAY)/In Betrieb nehmen/IP-Adresse/IP-Adress e @ 9\mod_1294213725358_21.doc x @ 67869 @ 3 @ 1 6.2.3 IP Address When using a crossover cable to connect between the panel and configuring PC directly, it is recommended that both devices have fixed IP addresses with an open address in the range 192.168.1.xxx.

  • Page 33: The Wago Control Center

    Commissioning 762-1057 WP 57 QVGA Pos : 65.1 /Serie 762 (PERSPEC TO und e!DISPLAY)/In Betrieb nehmen/WAGO C ontrol C enter/D as WAGO C ontrol C enter @ 9\mod_1294215383354_21.doc x @ 67872 @ 2 @ 1 The WAGO Control Center The WAGO Control Center can be used to configure the device. Settings for the Autostart programs, uses, FTP/HTTP and RAS access can be made.

  • Page 34: General" Tab

    Commissioning WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Pos : 65.4 /Serie 762 (PERSPEC TO und e!DISPLAY)/In Betrieb nehmen/WAGO C ontrol C enter/R egister karte General @ 9\mod_1294216222373_21.doc x @ 67888 @ 3 @ 1 6.3.2 “General” Tab Figure 11: “General” Tab Device Information Information about the device is found here.

  • Page 35: Autostart Applications" Tab

    WAGO-PERSPECTO® 762 Commissioning 762-1057 WP 57 QVGA Pos : 65.6 /Serie 762 (PERSPEC TO und e!DISPLAY)/In Betrieb nehmen/WAGO C ontrol C enter/R egister karte Autostart Applications - 0762-1xxx @ 10\mod_1313595023135_21.doc x @ 77230 @ 3 @ 1 6.3.3 “Autostart Applications” Tab You can enter programs here that should launch automatically after booting.

  • Page 36: Users" Tab

    Commissioning WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Pos : 65.8 /Serie 762 (PERSPEC TO und e!DISPLAY)/In Betrieb nehmen/WAGO C ontrol C enter/R egister karte Us ers @ 9\mod_1294223195152_21.doc x @ 67923 @ 3 @ 1 6.3.4 “Users” Tab You can create FTP users, grant rights and assign directories. The menu is generally self-explanatory.

  • Page 37: Ftp" Tab

    WAGO-PERSPECTO® 762 Commissioning 762-1057 WP 57 QVGA Pos : 65.10 /Serie 762 ( PER SPECT O und e!DISPLAY)/In Betrieb nehmen/WAGO Contr ol Center/R egister karte FT P @ 9\mod_1294223722918_21.doc x @ 67926 @ 3 @ 1 6.3.5 “FTP” Tab You can configure the FTP server of the device here.

  • Page 38: Http" Tab

    Commissioning WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Pos : 65.12 /Serie 762 ( PER SPECT O und e!DISPLAY)/In Betrieb nehmen/WAGO Contr ol Center/R egister karte HTT P @ 9\mod_1294225628954_21.doc x @ 67957 @ 3 @ 1 6.3.6 “HTTP” Tab You can configure the Web server of the device here.

  • Page 39: Ras" Tab

    WAGO-PERSPECTO® 762 Commissioning 762-1057 WP 57 QVGA Pos : 65.14 /Serie 762 ( PER SPECT O und e!DISPLAY)/In Betrieb nehmen/WAGO Contr ol Center/R egister karte R AS @ 9\mod_1294225745496_21.doc x @ 67960 @ 3 @ 1 6.3.7 “RAS” Tab The Remote Access Service (RAS) is a service for remote access to a Windows CE device.

  • Page 40: Backup/Restore" Tab

    WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Pos : 65.16 /Serie 762 ( PER SPECT O und e!DISPLAY)/In Betrieb nehmen/WAGO Contr ol Center/R egister karte Bac kup/R estore - 0762- 1xxx @ 10\mod_1313595029041_21.doc x @ 77234 @ 3 @ 1 6.3.8 “Backup/Restore”...

  • Page 41: Advanced" Tab

    WAGO-PERSPECTO® 762 Commissioning 762-1057 WP 57 QVGA Pos : 65.18 /Serie 762 ( PER SPECT O und e!DISPLAY)/In Betrieb nehmen/WAGO Contr ol Center/R egister karte Advanced - 0762-1xxx @ 10\mod_1313595010260_21.doc x @ 77226 @ 34 @ 1 6.3.9 "Advanced" Tab You can perform advanced settings for the device.

  • Page 42: Saving The Configuration

    WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Pos : 65.20 /Serie 762 ( PER SPECT O und e!DISPLAY)/In Betrieb nehmen/WAGO Contr ol Center/Speic her n der Konfig urati on @ 9\mod_1294226632900_21.doc x @ 67969 @ 3 @ 1 6.3.10 Saving the Configuration After configuring the panel, the settings must be permanently saved in the registry.

  • Page 43: Optimizing Web Visualization

    WAGO-PERSPECTO® 762 Commissioning 762-1057 WP 57 QVGA Pos : 67.1 /Serie 762 (PERSPEC TO und e!DISPLAY)/In Betrieb nehmen/Optimi eren der Web-Vis ualisi erung/Web-Vis ualisierung opti mi eren - Einl eitung @ 10\mod_1313499450012_21.doc x @ 77140 @ 2 @ 1 Optimizing Web Visualization The following settings have been made to optimize visualization.

  • Page 44: Adjustments In The Webvisu.htm Of The Controller

    "WebVisu.htm" and "WebVisu_wago.htm" files: <param name="UPDATETIME" value="100"> <param name="USEURLCONNECTION" value="False"> After installation of the WAGO-CODESYS application, the htm files and jar file are located in the CODESYS installation directory. Example path: C:\Program Files\WAGO Software\CODESYS V2.3\visu Pos : 68 /D okumentation allgemei n/Glieder ungs elemente/---Seitenwechs el--- @ 3\mod_1221108045078_0.doc x @ 21810 @ @ 1...

  • Page 45: Service

    WAGO-PERSPECTO® 762 Service 762-1057 WP 57 QVGA Pos : 69 /All e Seri en (Allgemei ne Module)/Ü berschriften/N eue Ü berschriften/Ebene 1Ser vic e - Übersc hrift 1 @ 4\mod_1241771948421_21.doc x @ 32830 @ 1 @ 1 Service Pos : 70 /Serie 762 (PERSPEC TO und e!DISPLAY)/Ser vic e durc hführ en/Batterie wechs el n @ 9\mod_1294738564312_21.doc x @ 68141 @ 2 @ 1...

  • Page 46: List Of Figures

    List of Figures WAGO-PERSPECTO® 762 762-1057 WP 57 QVGA Pos : 72 /D okumentation allgemei n/Verz eic hniss e/Abbil dungs verz eic hnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222916765_21.doc x @ 21080 @ @ 1 List of Figures Figure 1: Front View .....................

  • Page 47: List Of Tables

    WAGO-PERSPECTO® 762 List of Tables 762-1057 WP 57 QVGA Pos : 74 /D okumentation allgemei n/Verz eic hniss e/Tabell enverz eichnis - Übersc hrift oG und Verz eichnis @ 3\mod_1219222958703_21.doc x @ 21084 @ @ 1 List of Tables Table 1: Number Notation ..................8 Table 2: Font Conventions ..................
  • Page 48 Pos : 76 /D okumentation allgemei n/Einband/Einband H andbuc h - R üc kseite 2015 @ 9\mod_1285229376516_21.doc x @ 64944 @ @ 1 WAGO Kontakttechnik GmbH & Co. KG Postfach 2880 • D-32385 Minden Hansastraße 27 • D-32423 Minden Phone: 05 71/8 87 –...

This manual is also suitable for:

762-1057

Table of Contents