Settings Menu - Jensen CDR5620 Installation & Owner's Manual

From the Main Menu, press the gear icon to access the Settings menu and adjust
General, Clock, Audio, Bluetooth, Display or About options.
General:
• Language - Select English or Spanish.
• Tuner Region - Select America, Europe or Latin America.
• Beep - Enable or disable the audible beep.
• Rear Camera Delay- Select desired delay for rear camera: .5 seconds, 2
seconds, 3 seconds or Off (no delay).
• Reverse Trigger - Select On or Off for the reverse trigger feature.
• Rear Camera Image - Select Normal or 180 display of the rear camera image.
Clock:
• Mode - Select between 12-hour and 24-hour clock display.
• Hour - Set the hour for the clock display.
• Min - Set the minute for the clock display.
• AM/PM - Set AM or PM for the clock display.
Audio:
• Camera Audio - Turn the rear camera audio On or Off.
• Audio Level - Set audio levels (-7 to 7) for each audio source: Tuner, USB, SD
Card and Bluetooth Handsfree.
Bluetooth:
• Bluetooth - Turn Bluetooth signal on or off.
• Auto Connect - Turn auto connect feature on or off.
• Auto Answer - Turn auto answer feature on or off.
• PIN - Change the Bluetooth PIN (default is OOOO).
• Name - Displays the device name (JENSEN BT).
Display:
• Illumination Trigger - Turn the illumination trigger On or Off.
• Brightness Day - Adjust daytime brightness level (1 to 10).
• Gamma Day - Adjust daytime gamma level (-4 to 4).
• Wallpaper - Select one of four available wallpaper options.
• Contrast - Adjust contrast level (-4 to 4).
• Hue - Adjust hue (-4 to 4).
About:
• Screen Calibration - Press to calibrate the touch screen.
• Version - Press to display version numbers.
• System Reset - Press to restore unit to default factory settings.
• Setup WIzard - Press to initiate the system Setup Wizard.
• EULA - Select On or Off.
CDR5620 OPERATION

Settings Menu

9