1. Manuals
  2. Brands
  3. Newport Manuals
  4. Indoor Furnishing
  5. Integrity VCS
  6. Quick setup manual

Newport Integrity VCS Quick Setup Manual

Accessories
Hide thumbs
1
2
3

Advertisement

Table of Contents

Integrity VCS
Thank you for your purchase of Integrity VCS from Newport Corporation. You can find more product set-up
information on Newport's YouTube Channel. Search "Integrity VCS" on YouTube to start, or scan the QR code below:

Integrity Shelf Installation

The Integrity overhead shelf can attach at three
distinct locations (only one for 3 ft. 900mm version)
along the depth of the INT frame. Determine your
desired
location
based
accessibility needs and inspect those mounting holes
prior to installation.
1. Position the vertical supports in front of the
mounting-hole location and use fasteners to
install the supports to frame. At this point,
install but do not fully tighten down.
TM
Accessories Quick Set up Guide
upon
clearance
and
2. Have a colleague assist with lifting the shelf
assembly into position and attachment
hardware to fasten shelf to the uprights.
Make sure all connections are secure by
tightening down the bolts.
1

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the Integrity VCS and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for Newport Integrity VCS

Summary of Contents for Newport Integrity VCS

  • Page 1 Accessories Quick Set up Guide Thank you for your purchase of Integrity VCS from Newport Corporation. You can find more product set-up information on Newport’s YouTube Channel. Search “Integrity VCS” on YouTube to start, or scan the QR code below: Integrity Shelf Installation The Integrity overhead shelf can attach at three 2.
  • Page 2 2. Attach the mounting bracket to the desired location on the Integrity VCS overhead shelf. Tighten screws under the bracket to secure the bracket to the shelf. 2. Attach the mounting bracket to the desired location on the Integrity VCS overhead shelf.
  • Page 3 1. Adjust the leveling feet so that the caster can fit underneath the frame 2. Bolt the casters underneath the frame on the sides. Check to make sure all the connections are secure. Readjust leveling feet height if needed. If you need more information, please contact tech@newport.com, or call +1-877-835-9620.

Table of Contents