Philips PerfectCare Compact Plus GC7929 User Manual page 23

Problem
Water droplets
come out of the
soleplate.
Dirty water
and impurities
come out of the
soleplate.
Possible cause
After the Calc-Clean
process remaining
water may drip out of
the soleplate.
You have used the
steam boost function
too frequently.
The Calc-Clean
process has not been
completed.
Steam condenses
into water in the hose
when you use steam
for the first time or
have not used it for a
long time.
Impurities or
chemicals present
in the water have
deposited in the
steam vents and/or
soleplate.
ENGLISH
Solution
Wipe the soleplate dry
with a piece of cloth.
If the Calc-Clean light
still flashes and the
appliance still beeps,
perform the Calc-
Clean process (see
chapter 'Cleaning and
maintenance').
Use the steam boost
function only for
stubborn creases. It is
recommended not to
use it for more than 5
times within 3 minutes.
You have to perform
the Calc-Clean
process again (see
chapter 'Cleaning and
maintenance').
This is normal. Hold
the iron away from
the garment and press
the steam trigger. Wait
until steam instead of
water comes out of
the soleplate.
Perform the Calc-
Clean process
regularly (see chapter
'Cleaning and
maintenance').
23