Flying Multiple Helicopters - Protocol AVIATOR Instruction Manual

FLYING MULTIPLE HELICOPTERS

If flying more than one helicopter simultaneously, make sure that the transmitters
and helicopters are paired to ensure that they detect different frequencies. The
remote is preset to Band A.
- Pilot A turns on their helicopter and remote and syncs.
- Next, Pilot B does the same. Then, Pilot B presses the band selector for two
seconds. The indicator light will flash twice for Band B.
- Both helicopters are ready to fly.
*To switch from B to A, just press the band selector again for 2 seconds and the
indicator will flash once.
11