Daikin Rotex A1 BO Series Installation And Maintenance Instructions Manual page 43

Dismounting and regenerating the condensate box
DANGER OF CHEMICAL BURNS!
The condensate box contains acidic condensate that
can lead to injury upon contact with the skin or eyes.
Wear protective clothing (safety glasses, rubber
gloves) when working on the condensate box.
If your skin comes in contact with anything, wash
the affected area immediately with tap water.
If the chemicals come in contact with eyes,
immediately wash with tap water and consult an
ophthalmologist.
1. Open the fixing belt (fig. 9-4, pos. 3).
1 Condensate box
2 Condensate plug connector on flue gas elbow
3 Fixing belt with snap closing
4 Flexible connecting hose
Fig. 9-4 Connections to the condensate box
2. Lift the stabilising plate (fig. 9-5, pos. 2) and pull out the
connecting muff (fig. 9-5, pos. 1) from the condensate drain.
1 Connector sleeve for condensate connector
2 Stabilising plate
Fig. 9-5 Condensate box (plug connector)
FA ROTEX A1 BOe - 02/2014
9 x Service and maintenance
3. Lift the condensate box and empty it through the connection
hose (fig. 9-6).
Fig. 9-6 Emptying the condensate box
4. Place collector container under the hose connection. Remove
the flexible connector hose from the condensate box
(fig. 9-7).
Fig. 9-7 Pull out connecting flexible hose
5. Pull the condensate box forwards under the boiler.
43