Service Level ..................................................13 Configure Channels ................................................ 13 Clear Service Level ................................................. 13 Copy Service Level ................................................13 Power on Channel ................................................13 www.pdiarm.com www.mymedTV.com PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870...
Page 3
ADVANCE OPTIONS – SYSTEM ............................................... 15 Diagnostics ..................................................15 Reset to Factory Defaults ............................................15 USB Cloning ..................................................15 Limited Warranty .......................................................16 www.pdiarm.com www.mymedTV.com PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870...
Page 4
PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870...
à oxygène. Une telle utilisation peut causer operate from battery power, or other sources, refer to the un risque d'incendie. operating instructions. www.pdiarm.com www.mymedTV.com PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870...
Installation Precautions For Power over Coax, use only a power source from PDi suitable for use in a healthcare facility. The single coaxial cable on top of the TV is used to supply both low voltage AC or DC power (28VAC or 24VDC) and RF signal to the television, UNLESS the unit is powered over ethernet.
To make changes to the television, you must first open the green TV app found on the home screen, see TELEVISION SETTINGS. www.pdiarm.com www.mymedTV.com PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870...
TELEVISION SETTINGS TV setup can be done using the touchscreen or a PDi programming remote. If you choose to use the PDi programming remote (Part Number PD108-420), that must be ordered separately. Using the PD108-420 remote, use the LAST button in place of the BACK function on the touchscreen.
Scroll thru the channel list and uncheck any channels you want to exclude from the channel list. Touch BACK or press LAST on TV remote to exit settings. www.pdiarm.com www.mymedTV.com PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870...
Not for children age 17 or younger, under any circumstances. NC-17 No Children under age 17 Strong sexual content or violence. No Rating MPAA not rated. www.pdiarm.com www.mymedTV.com PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870...
Once the TV is on, the volume can be set to any allowable level. NOTE: If Power on Volume is set to LAST, and physical power is removed (ie. a power outage), the TV will power on with a volume of zero. www.pdiarm.com www.mymedTV.com PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870...
Override allows any channel to be entered using the TV remote’s number pad, even if the channel is not memorized in the current Service Level. Toggle the switch to turn Channel Override On/Off. www.pdiarm.com www.mymedTV.com PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870...
Page 14
TV’s connectors. Change the source status to either Disabled or Enabled/APO (Auto Power Off) or Enabled/No APO (No Auto Power Off). www.pdiarm.com www.mymedTV.com PDi Communication Systems, Inc. ▪ 40 Greenwood Ln ▪ Springboro, Ohio 45066 USA ▪ ▪ Phone 800.628.9870...
Page 15
USB Cloning Cloning allows you to quickly and easily copy settings and channels from one TV to other PDi TVs. Clone operation involves first downloading setup information from a programmed host TV to a USB memory stick (thumb drive) and then uploading the setup information to another TV.
Page 16
The firmware is field upgradeable, but normally does not require this process and should be performed by the hospital technician. A special data file is required from the PDi factory to complete this process. Firmware files are written to the root directory of a blank USB Flash Drive, connected to the TV’s Cloning port and updated using the TV’s menus.
Need help?
Do you have a question about the medTAB14 and is the answer not in the manual?
Questions and answers