Westfalia 847698 Original Instructions Manual page 13

Attach the mitre saw
on the stand by using
the included
nuts and washers (6).
The mitre saw stand
is assembled
ready for use.
Using
Please always observe the safety instructions for the used mitre saw.
Always make sure the mitre saw stand is placed horizontally and cannot topple
over. To ensure stability and safe stand, do not completely pull out the extensions
during work. Leave approx. 5 cm of the extensions inside the stand tubes.

To pull out the extensions, loosen the length adjustment knobs (2) and pull
out to the desired length. Retighten the length adjustment knobs after setting.

To adjust the height of the roller supports, loosen the height adjustment knobs
(3) and retighten again.

With the roller supports (4) the workpiece can be moved appropriately while
sawing. For fixing the workpiece in place, lift up the fixed supports (9).
Assembly and Usage
bolts,
and
9