Copying Presets to the Camera
The camera can store up to ten presets;
to copy IPTC presets from a memory card
to a selected destination on the camera,
choose [Load/save], select [Slot 1] or
[Slot 2], then highlight [Copy to
camera] and press 2 .
•
Highlight a preset and press J to proceed to the [Select
destination] list. To preview the highlighted preset, press
W / M instead of pressing J . After previewing the preset,
press J to proceed to the [Select destination] list.
•
Highlight a destination and press J to display a dialog where
you can name the preset. Name the preset as desired and
press J to copy the preset to the camera.
•
In addition to the ten presets mentioned above, the camera
can store up to three XMP/IPTC presets created on a computer
and saved in XMP format. XMP/IPTC presets are not displayed
during playback. Nor can they be copied from the camera to a
memory card.
B The Setup Menu: Camera Setup
917