Table of Contents
Advertisement
3.4
Mounting Bungee Cords
As time goes by it can happen that individual bungee cords need to be replaced because of their
wear and tear. To mount new bungee cords on your trampoline follow the next steps.
NOTICE
L
To make sure that the jumping mat is evenly tensioned please follow the exact sequence and
position of mounting the bungee cords. Ignoring this instruction will lead to a shorter life span
of the elastic components and will negatively impact the function of the trampoline.
1.
Choose a point where you wish to begin mounting the bungee cords (H4).
2.
Hook one end of the bungee cord (H4) onto the jumping mat (H2) and pull the other end around
the frame (H1) (see fig. 20). Hook the other end of the bungee cord (H4) onto the same place on
the jumping mat (H2) (see fig. 21).
3.
To tension the jumping mat (H2) mount a bungee cord (H4) on the opposite side to where you
mounted the first bungee cord (H4) (see fig. 22) using the same procedure as described in step
2 and step 3.
Fig. 20
Fig. 22
Fig. 21
19
Advertisement
Table of Contents
