2.5
Assembly
Before assembly, take a close look at the individual assembly steps shown and carry out the assembly
in the order given.
NOTICE
L
First loosely screw all parts together and check that they fit properly. Then tighten the screws
using the tool only when you are instructed to do so.
Step 1:
Mounting the clamp
1.
Place the clamp (E) between two legs on the frame of the trampoline (see fig. 5 and fig. 6).
⚠
CAUTION
Ensure that the stopper is located on the frame between the clamp.
Fig. 5
2.
Press the clamp on the frame together (see fig. 7) and fasten the clamp with two Allen screws
(H) and washers (K) each (see fig. 8).
3.
Tighten the bolts using the Allen key (O).
Fig. 7
E
Fig. 6
H
K
E
Fig. 8
13