Step 4:
Connecting the bar to the adjustable tube
To mount the bar (B) to the adjustable tube (D) use four curved washers (J), two cylinder head bolts
(I) and two safety nuts (L) (fig. 11)
Tighten them by using the Allen key (O) and the ring spanner (P).
Step 5:
Connecting the adjustable tube to the support tube
NOTICE
L
The spring button (M) is already inserted in the adjustable tube (D).
Insert the adjustable tube (D) into the support tube (C) (see fig. 12).
NOTICE
L
Pay attention that while inserting the adjustable tube (D) the spring button (M) is pointing
towards the holes of the support tube (C).
B
I
J
L
D
Fig. 11
D
C
Fig. 12
15