Table of Contents
Advertisement
Monitor Adjustment Procedure
The vertical/horizontal controls and bright-
ness/contrast controls are located on the
monitor control board. See Figure 1.
Unlock and open the top bezel so the control
board is accessible while viewing the moni-
tor. Pressing the button labeled Menu on
the control board will show the on-screen
display on the monitor. Adjust the monitor
controls until the screens look as suggested
in the following steps. When finished, close
and lock the bezel.
1.
Set the game to the Quik Match game
screen.
2.
Adjust the vertical and horizontal size
and vertical and horizontal position to
make sure that the game screen fills
the monitor screen and that the game
screen is centered.
3.
Adjust the brightness and contrast con-
trols until the red tiles are a rich red and
the background is black. The numbers
on the tiles should be bright white. (Ad-
justing the brightness and contrast can
also correct for a lack of sharpness.)
SECURITY KEY 1
FIGURE 1 - MONITOR CONTROL BOARD
3
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
General Circuit Board Handling
Information
Before handling any boards, observing the
following procedures to prevent electro-
static discharge:
1.
Store the boards in the anti-static bags
in which they are shipped.
2.
Remove any static charge from your
body before handling the boards.
3.
Use a ground strap when handling the
boards.
•
When plugging in connectors to the
board, make sure the connector is
inserted straight onto the header and
that the connector covers all header
pins.
•
Do not connect any peripheral device
to the board, if the power is still
connected to the peripheral or if power
is already applied to the board.
CAUTION: Be extremely careful when
replacing the lithium battery on the
motherboard. There is a danger of ex-
plosion if the battery on the
motherboard is incorrectly replaced.
Only replace the battery with the same
type recommended by the manufac-
turer. Dispose of used batteries ac-
cording to the manufacturer's instruc-
tions.
CALIBRATE
SETUP
MONITOR CONTROLS
MONEY SHOOT OWNER'S MANUAL
REMOTE SETUP/
CALIBRATE KEY
LCD
PM0519-03
Advertisement
Table of Contents
