Table of Contents
Advertisement
Diagnostics Menu
Video Test
Touch the screen to cycle through a series of video test screens.
Tests the SETUP and CALIBRATE buttons, all coin channels, all 5
meters (Cash In, Cash Out, Hopper Refill, MegaNet Play, and Prize
Pool), and Door Open, Refill Key, and Note Acceptor switches. A green
I/O Test
light next to the appropriate button will register each time that item is
tested, and the number next to the item should increment by one with
each test. The I/O Test Screen also displays which DIP switches are
on or off.
Touchscreen
Follow the on-screen instructions to calibrate the touchscreen.
Calibration
Touchscreen
Allows you to check the touchscreen calibration accuracy. The cross
Test
should follow your finger exactly when you move it across the screen.
Displays a log of all operations performed by the game since the log
View System
was last cleared. This information is helpful for customer service in
Log
troubleshooting your game.
Checks the hard drive for missing or corrupted files. With STOP ON
ERROR? set to YES, a message indicating which file is corrupted will
be shown whenever the game encounters an error. With STOP ON
Checksum Test
ERROR? set to NO, a list of corrupted files will be displayed when the
test is complete. If errors are detected, the software on the drive may
need to be reloaded. If this does not solve the problem, the drive may
require replacement. The test could take up to 30 minutes.
Gives details about the following:
•
processor type and speed
•
motherboard manufacturer
•
amount of memory
•
Ethernet card manufacturer
•
System Info
sound chip type
•
video chip type
•
touchscreen manufacturer
•
hard drive manufacturer and capacity
•
modem part identification number
•
fan speed (FORCE games only)
11
COPYRIGHT © 2005 MERIT INDUSTRIES, INC.
FIGURE 11 - DIAGNOSTICS MENU
MONEY SHOOT OWNER'S MANUAL
PM0519-03
Advertisement
Table of Contents
