Gemini GD20SS User Manual page 11

Operating introduction
- When powering on, if the machine has been already set timing
powering on time, and then if you set timing powering on time again,
the timing will be increased from the data of preset remaining time, and
if you don't set again within 3s, it will turn to indicate timing powering
on time, and as times goes by, it will indicate preset remaining time.
• Timing powering OFF:
- When the machine is operating, pressing timer button to set powering
OFF time from 00H, 01H, 02H, 03H, 04H......11H, 12H, 00H, the digit
tube blinking indicate the condition of powering OFF setting, if we don't
set within 3s, it will turn to indicate Room humidity value.
Remark:
① When setting the timing is 00H, the timing indicator lamp is not lighting(it indicate no
timing setting), if we set timing time 01H, 02H, 03H, 04H......11H, 12H, the timing indicator
is lighting(it indicate timing setting);
② We can set the powering ON time when it's under standly mode,and can set powering OFF
time when it's under working.
③ When the setted time arrived,the machine will stop working immediately and stepping
motor will turn down(clockwise) to make air-plate close 100°;
④ If the setted time is not arrived,water full switch will be closed,machine recover to work
as per before water-full switch cut off;
⑤ As times goes by,it will indicate preset remaining time
- When the machine is under operating, if the timing powering on is
set, the data will increased from preset remaining time if we set
powering OFF time anew, and digit-tube is blinking to indicate timing
powering OFF is being setted. If we don't operate within 3s, display
will turn to indicate Room value.
P11