Page 1
MOCHA Installation Instructions works with the Google Assistant Compatible with...
Page 2
Please read and save these instructions before installation...
Page 3
GENERAL INQUIRIES FAN SUPPORT For all questions about your ceiling fan please read all For fast service have the following information below included instructions, installation procedures, trouble- when you call: shooting guidelines and warranty information before starting installation • Model Name and Number For missing parts or general inquiries •...
Page 4
SAFETY RULES For operation, maintenance, and troubleshooting information, visit http://modernforms.com/fan-support/ To reduce the risk of electric shock, ensure electricity has been turned off at Never place objects in the path of the fan blades. the circuit breaker before beginning. To avoid personal injury or damage to the fan and other items, please be cautious when working around All wiring must be in accordance with the National Electrical Code “ANSI/ or cleaning the fan.
Page 5
SAFETY RULES WARNING: Do not install or use your fan if any part(s) is/are damaged or WARNING: Do not insert foreign objects between rotating fan blades. missing. This product is designed for use only with the supplied parts and/ or accessories designated for use with this product by Modern Forms. WARNING: Do not operate fan unless fan blades are in place.
Page 6
GET SMART All WAC Smart Fans are: Quiet, reliable, and up to 70% Wet location-listed to the strictest Coordinate with smart devices more efficient than AC motor fans UL/cUL safety regulations for voice-activated control MOTOR Wi-Fi and Bluetooth enabled Compatible with our WAC app for unlimited control The WAC app synchronizes seamlessly with smart home devices you already own works with the...
TABLE OF CONTENTS Package Contents Mounting Options Installing the Mounting Bracket Attaching the Fan Blades Hanging the Fan Making the Electrical Connections Installing the Wall Control Finishing the Installation Installing the Luminaire Module Controlling the Fan Factory Reset App Instructions Accessories...
Page 8
TOOLS & MATERIALS REQUIRED Electrical tape Wire cutters Phillips screwdriver Step ladder Hanging Weight: 17lbs NOTE: Before discarding packaging materials, be certain all parts have been removed. NOTE: Place the parts from the hardware bag into a small container to keep them from being lost. MAC ID IMPORTANT: Please make note of the MAC ID on the receiver and keep it in a safe place.
MOUNTING OPTIONS INSTALLING THE MOUNTING BRACKET Standard Ceiling Slope Ceiling Caution: Remember to disconnect the power at the circuit breaker. CAUTION: To prevent electrical shock, ensure electricity Remove 1 set screw from mounting bracket and set aside for use in Finishing the Installation. has been turned off at the circuit breaker before beginning.
ATTACHING THE FAN BLADES Place blade on motor and secure with the blade attachment, screws and washers. Insert blades in slots, aligning with motor assembly holes. Secure blades with blade attachment screws & washers. Remove set screws from motor housing, install blade collector ring (when applicable), and re-install screws.
HANGING THE FAN Remove screw from hanger ball. Remove hanger ball and cross pin. Loosen 2 screws, clevis pin and cotter pin. Install coupling cover, canopy screw ring, canopy and downrod assembly into motor housing as shown. F -0 01...
Page 13
HANGING THE FAN Align downrod and motor collar holes, re-insert Seat all into the mounting bracket. Rotate until ball drops and locks into hanger bracket screw. pins and screws. Secure safety cable to structure. Slip up canopy and canopy screw cover. Re-install hanger ball with cross pin in correct place.
MAKING THE ELECTRICAL CONNECTIONS Connect the wires from fan to the corresponding wires Outlet Box on the receiver. White (neutral) Black (hot) Green (ground) Connect the wires from the outlet box to the corresponding Black (“AC IN L”) wires on the receiver. White (“AC IN N”) Green (ground) NOTE: Follow wiring diagram found on the receive hardware.
INSTALLING THE WALL CONTROL WHITE WHITE BLACK (TO FAN) BLACK (FROM BREAKER) BLACK COPPER GREEN (GROUND) GROUND WHITE (NEUTRAL) WALL OUTLET BOX WALL CONTROL NOTE: Wall control not included. A Bluetooth wall control accessory can be purchased separately. NOTE: For multi-location wiring, skip to the next step. Connect the green wire marked “GROUND”...
Page 16
INSTALLING THE WALL CONTROL if Applicable Wall Controller 1 Wall Controller 2 Wall Controller 3 White to Fan Black to Fan Green to Fan HOT IN Green Install the wall control using the wiring diagram above. Individually pair each of the wall controls with the fan receiver using the pairing instruction. F-0 01...
FINISHING THE INSTALLATION Secure wire connectors with supplied wire ties. Install canopy to mounting bracket with the screw removed in section 2. Outlet box Install canopy screw ring as shown. Hanger Bracket Screws Canopy Canopy Screw Cover F - 0 0 1...
Page 18
INSTALLING THE COVER When installing the Non-Luminaire version (F-003) Install luminaire cover without over-tightening. F-0 01...
INSTALLING THE LUMINAIRE MODULE When installing the Luminaire version (F-003L) Secure the luminaire module with the 3 screws to the Install glass shade without over-tightening. adapter plate. F - 0 0 1...
CONTROLLING THE FAN Summer Mode (Counter-Clockwise) Air-Gap Switch* Wall Control Remote Pairing Unpairing Winter Mode * Air-Gap Switch only included Control Press and hold buttons To purge, press and hold buttons for 4 seconds. (Clockwise) with wall control for 10-15 seconds. NOTE: Your fan features 6 speeds.
Page 21
CONTROLLING THE FAN Breeze Mode Controlling Multiple Fans with Remote or Wall Controls Your remote and wall controls are capable of controlling Breeze Mode mimics the natural ebb and flow of winds in multiple fans. A remote or wall control has the ability to control nature by varying the fan speed.
Page 22
CONTROLLING THE FAN Fan On/Off Light On/Off Fan Direction Press and hold Press and hold Press and hold button for 4 seconds. button for 4 seconds. button for 4 seconds. Fan On/Off: Press and hold button for 4 seconds. The LED on the remote will flash green and all connected fans will beep to indicate the message has been received.
FACTORY RESET WACFan_841812 Fan Wi-Fi Reset Factory Reset Receiver Factory Reset Press and hold buttons for 10 seconds Press the reset button on the receiver Press and hold the buttons until the LED until the receiver beeps blinks green and the receiver beeps NOTE: Changes to your Wi-Fi network settings (SSID or Security NOTE: Factory reset will remove remote control(s), wall control(s) Passphrase) will prevent your fan from connecting to the cloud.
Page 24
APPLICATION In addition to the included control, you can operate your fan with the WAC app Upgradeable with Smart Features Scan the code to the right with your phone to find out how you can enable smart features through the WAC app and integrate with your smart home ecosystem.
Page 25
APPLICATION The WAC app will walk you through the main screen and show you how to create schedules, change fan speeds, dim the light, switch between Summer and Winter Modes, invite users, create groups and much more. Please refer to the WAC app instructions for more details.
ACCESSORIES Product Model Description Finish 6 fan speeds, dims light to 1% Bluetooth Wall Control WC20- Works in conjunction with WAC Smart Fan receiver (not included) Coupler BA, BN, MB, MW Connects two downrods Designed to accommodate buildings with steeper BA, BN, MB, MW Slope Ceiling Kit sloped ceilings up to 45°...
Page 27
ACCESSORIES Product Model Description Finish Downrod DR-12 12” downrod BA, BN, MB, MW DR-18 18” downrod BA, BN, MB, MW DR-24 24” downrod BA, BN, MB, MW All our downrods are 1” 1” O.D. and are threaded on the motor DR-36 36”...
Page 28
Felicidades por tu nueva compra. CERTIFICATE OF WARRANTY Su nuevo ventilador moderno de formas modernas está diseñado para facilitarle la vida cada día. WAC crea ventiladores y luminarias para el futuro que proporcionan ahorros de energía y eficiencia excepcional. Nuestra dedicación a hacer las cosas de la manera Congratulations on your new purchase.
Page 29
Félicitations pour votre nouvel achat. Votre nouveau ventilateur intelligent WAC est conçu pour vous simplifier la vie au quotidien. WAC crée des ventilateurs et des luminaires d’avant-garde qui permettent des économies d’énergie et une efficacité exceptionnelle. Notre engagement à bien faire les choses va au-delà...