Toro 04063 Installation Instructions Manual page 5

•
Flex/eFlex 1820 machines: position the
mount plate to the outside of the left side
plate (Figure 8).
•
Flex/eFlex 2120 machines: position the
mount plate to the inside of the left side
plate (Figure 9).
Figure 8
Flex/eFlex 1820 Machine Shown
1. Flange locknut (5/16 inch)
2. Mount plate
3. Washer
g210476
4. Flange-head bolt (5/16 x
1-1/2 inches)
5. Left side plate
Flex/eFlex 2120 Machine Shown
1. Flange locknut (5/16 inch)
2. Mount plate
3. Washer
2. Use 1 flange-head bolt (3/8 inch), 1 flange-head
bolt (5/16 x 1 inch), 1 flange nut (3/8 inch), and
1 flange nut (5/16 inch) to secure a light mount
to the mount plate
5
Figure 9
4. Flange-head bolt (5/16 x
1-1/2 inches)
5. Left side plate
(Figure 10).
g200371