Table of Contents
Advertisement
1-9. Checks after Connection
After installing the unit, check to see the lighting operation of the following LEDs to determine whether
the system is get up and running normally or not.
n
Ensure that the unit is under the following conditions before checking of the LEDs' operation.
. The RAIDs connected to the MAV-S2000 are get up and running.
. The REF VIDEO connector of the MAV-2000 receives a signal with a connected cable.
1-9-1. Checking MAV-2000
7-seg LEDs' Operation
Board
Ref.No. (Address)
TM-37
ND201 (L-5)
FM-62
ND401 (A-7)
Front Panel Indicators' Operation
Status Indicator
Color
POWER A
green
POWER B
green
POWER C
green
BUSY
Amber
SYSTEM
green
1-9-2. Checking of BKMA-2010
LEDs' Operation
Board
Ref.No. (Address)
DM-119
ND401 (L-5), ND402 (L-6)
1-9-3. Error Display
The 7-segment displays of the TM-37 board, FM-62 board and DM-119 board remain at "E1" during
startup, and errors will be detected by the self-diagnostics of each board.
Clear the error referring to the Maintenance Manual, Section "2-4. Error Messages".
MAV-2000
Type
Color
Operation
7-seg LED
_
Outer segments flash cyclically
7-seg LED
_
Outer segments flash cyclically
Operation
Turns on
Turns on
Turns on
Flashes or turns off
Turns on
Type
Color
Operation
7-seg LED
_
All segments of the 7-segment LED on the
left flash cyclically
1-9. Checks after Connection
1-13 (E)
Advertisement
Table of Contents
