Reading RFID Tags
1. Turn on power to the reader and it beeps one time.
2. Power on the mobile terminal and launch BCC RFID APP. Tap
3. Press MODE button and release within 3 seconds to check IH25's operation mode.
4. Press the trigger button to read tags.
Note
IH25 Bluetooth UHF RFID Reader
corner of Connect screen and select Barcode Way and scan the QR code on the
label attached at the bottom of the reader's main body.
If RFID LED lights up, it means IH25 works in RFID mode; If 1D/2D LED lights up,
it means IH25 works in Barcode mode. Press and hold the MODE button for at
least 3 seconds to switch to RFID mode.
•
The Barcode Way is only supported by Honeywell's mobile device. Please refer
to another way of connection on page 11.
•
Make sure to switch on the Bluetooth function and Location (Settings
Security & location Location) on mobile before connecting. Otherwise, the
connection fails all the time.
•
RFID tags can be read when they are in range. The range (typically 0.2ft—20ft)
at which a tag can be read depends on the tag type and size and the number of
tags in the field.
on the right top
7