Subscribe to Our Youtube Channel
Related Manuals for RGB Technology KAZEL WA-1 MINI
Summary of Contents for RGB Technology KAZEL WA-1 MINI
- Page 1 OPERATION AND MAINTENANCE MANUAL WA-1 MINI Product code: 314-01-01 *Explanatory figure...
- Page 2 Table of Contents Specifications ..................................3 Transport and storage ................................ 3 Device construction ................................3 WA-1 MINI construction ............................3 3.1.1 List of display cables ............................3 WA-1 MINI dimensions .............................. 4 Mounting the display for weighing scales ......................... 4 3.3.1 Mounting bracket..............................
- Page 3 1. Specifications The display for weighing scales WA-1 MINI Dimensions: 404mm x 151mm x 40mm / 15.9in x 5.9in x 1.6in Digit height: 60mm / 2.4in Permissible input voltage range (long-term): 100 ÷ 240 VAC Permissible input voltage range (short-term): 85 ÷...
- Page 4 3.2 WA-1 MINI dimensions Fig. 2 3.3 Mounting the display for weighing scales 3.3.1 Mounting bracket Fig. 3 4. Mounting the device Correct mounting consists in installing the device on a flat surface with wires facing down. Only the proper mounting of the device ensures its proper operation and the maintenance of the device parameters, like, among others, the housing tightness rating to satisfy the IP code.
- Page 5 4.2 Autolearn function The Autolearn mode is enabled by default (position no. 0 is set in the 'proto' submenu). In order to disable it, the communication protocol must be set manually using the embedded user menu or the RGB WagSet 2 software.
- Page 6 NOTICE! The disassembly of the housing must be made with the disconnected power supply. When doing this, take special caution because of the possibility of electric shock. The user menu is called up by pressing and holding the "DEF" micro switch and releasing it when the desired option is displayed.
- Page 7 5. MINI extender The extender module is a component of the display for weighing scales, which enables the communication with peripheral devices. 5.1 Extender Connectors det. A – LAN (optional); det. B – RS-232; det. C – 0/20mA digital current loop; det.
- Page 8 6. Automatic brightness control of the display for weighing scales 6.1 Lighting sensor In the standard version, the display for weighing scales has a lighting sensor included, which is placed on the LED panel. The device, in response to the intensity of daylight, adjusts the brightness of the display for weighing scales. 7.
Need help?
Do you have a question about the KAZEL WA-1 MINI and is the answer not in the manual?
Questions and answers