1. Manuals
  2. Brands
  3. RGB Technology Manuals
  4. Lighting Equipment
  5. WA-1 MINI
  6. Operation and maintenance manual

RGB Technology WA-1 MINI Operation And Maintenance Manual

Hide thumbs
1
2
3
4
5
6
7

Advertisement

Table of Contents

Innovation Wireless td - Newark, Notts
L
info@innovation-wireless.co.uk
OPERATION AND MAINTENANCE MANUAL
WA-1 MINI
Product code:
304-01-01
*Explanatory figure

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the WA-1 MINI and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for RGB Technology WA-1 MINI

Summary of Contents for RGB Technology WA-1 MINI

  • Page 1 Innovation Wireless td - Newark, Notts info@innovation-wireless.co.uk OPERATION AND MAINTENANCE MANUAL WA-1 MINI Product code: 304-01-01 *Explanatory figure...
  • Page 2 5.2.1.3 RGB WagSet 2 software ..........................6 MINI extender..................................6 Extender Connectors ..............................6 List of extender connectors in the WA-1 MINI display for weighing scales ............... 6 6.2.1 RS-232 connector: ............................. 7 6.2.2 RS-485 / RS-422 connector: ..........................7 6.2.3...

  • Page 3: Specifications

    +60°C at the humidity below 99%RH. 4. Device construction WA-1 MINI has a housing made of polycarbonate, which is resistant to UV radiation and has a high mechanical strength. By using the thermo-moulded housing and a rear sealing layer, the device, when properly assembled, meets the IP66 tightness requirements.

  • Page 4: Mounting The Device

    4.2 WA-1 MINI dimensions All dimensions shown in the drawings are given in [mm]. Fig. 2 4.3 Mounting the display for weighing scales 4.3.1 Mounting bracket Fig. 3 5. Mounting the device Correct mounting consists in installing the device on a flat surface with wires facing down. Only the proper mounting of the device ensures its proper operation and the maintenance of the device parameters, like, among others, the housing tightness rating to satisfy the IP code.
  • Page 5 5.2.1 Defining communication protocols 5.2.1.1 Embedded user menu (micro switch) The user menu embedded in the device allows you to select the communication protocol, display the information about the software version, reset the device to the default settings. The micro switch, used to operate the menu, is located inside the display housing.
  • Page 6 6.2 List of extender connectors in the WA-1 MINI display for weighing scales Table 2 presents an overview of the extender connectors in the WA-1 MINI display for weighing scales. These connectors are available after removing the cover (Fig. 6) det.

  • Page 7: Initial Start-Up

    6.2.1 RS-232 connector: For configuration purposes, the user connects with the display for weighing scales via the RS-232 connector (Fig. 5), using the computer with the RGB WagSet 2 software installed. 6.2.2 RS-485 / RS-422 connector: For configuration purposes, the user connects with the display for weighing scales via the RS-485 or RS-422 connector (Fig.

This manual is also suitable for:

304-01-01

Table of Contents