Advertisement
INSTALLATION (POLE & OTHER FIXTURES)
To install poles and other xtures,
*Refer to Page 6 for instructions on how to hang curtains.
Hanger Rod
Rod Bracket
Manual Fastening Device
39.3 in.
Pole 1
1
Set the poles upright and distance them apart to the desired width of the unit.
After keeping the rod brackets level, t the rods into the rod bracket as shown
2
in the diagram.
3
Adjust the height of the rod brackets to the desired height using rubber rings
and then gently tighten the safety bolt in the back by hand.
5
Rod
Safety Bolt
Rod Brackets
Insert the hanger rod into
the rod bracket.
Adjust the height of the
rod bracket and then
tighten the safety bolt to
keep it xed.
*Product Dimensions:
Width: 47in.
Height: 67 in.~ 99.6in.
Depth : 13.8 in.
Pole 2
INSTALLATION (CURTAINS)
To Hang Curtains
Installing Curtain Rod Brackets (1)
*Tighten the tie bolt on the other side of the nut.
*Important: Please insert the wedge.
Left Side:
Wedge
curtain rod bracket
Left
Left
Keeping the curtain rod brackets level, attach them to the
upper poles. Tighten the tie bolt on the other side of the
nut. (The nut is only on one side of the bracket.)
Installing Curtain Rod Brackets (2)
Curtain rod
Identify the curtain
rings on the top
edge of the curtain.
Thread the curtain
rings through the
Curtain Ring
curtain rod and put
the rod into the
brackets.
After mounting the
Curtain Rod Bracket
curtain rod onto the
rod bracket, tighten
Curtain Rod
the safety bolt.
Safety Bolt
With the Nut
Right Side:
Without the Nut
Make sure both safety bolts are facing the ground.
Finished Product
Arrange curtains evenly.
Right
6
Advertisement
