Advertisement
ASSEMBLY INSTRUCTIONS (POLE)
Assemble the parts to the upper and lower poles in order, as shown in the diagram.
Pole 1
Ceiling Mount
Attach the curtain rod bracket
after installing the pole. Refer
to Page 6 for more information.
Rod Bracket
Rubber Ring
Rod Bracket
Rubber Ring
Extend the upper pole about
20 in. before assembling the
parts in order, as shown in the
Upper Pole
diagram.
(Thinner Pole)
Manual Fastening Device
Lower Pole
(Thicker Pole)
Floor Mount
3
The rubber ring helps keep the xtures in place and should be inserted underneath all of the xtures.
(The rubber rings inserted underneath the xtures are not visible after installation.)
Pole 2
Ceiling Mount
Attach the curtain rod bracket
after installing the pole. Refer
to Page 6 for more information.
Rod Bracket
Rubber Ring
Rod Bracket
Rubber Ring
Extend the upper pole about
20 in. before assembling the
parts in order, as shown in the
Upper Pole
diagram.
(Thinner Pole)
Manual Fastening Device
Rod Bracket
Lower Pole
(Thicker Pole)
Used to support rods.
Please assemble the
bracket so that it is
U-shaped.
Floor Mount
INSTALLATION (POLE)
To Install the Poles,
Explanation
At the desired location, hold the lower pole with one hand and the upper pole with
the other and push it up to the ceiling so that the pole is xed upright to both the
ceiling and the oor. (Make sure the pole is xed securely on the ceiling by pushing
the pole up as far as you can (which can extend up to 1 1/6 in. due to the spring
mechanism in the ceiling mount)
After installing the pole, tighten the safety bolt behind the one-touch fastening
device by hand for safer use of the unit.
Ceiling
.79 in. ~1.18 in.
The pole extends about
3/4 in. to 1 1/6 in. due to
the spring.
Install the unit, so that it
is slightly tilted towards
the wall, not strictly
perpendicular to the
oor.
Wall
Safety Bolt
(Tighten gently by hand.)
Install the poles after the
lower pole is securely
attached to the oor mount.
Floor
4
Advertisement
