Table of Contents
Advertisement
Connection screen appears to prevent you from using
your device.
DO NOT delete any files that are pre-installed on
the device. Deleting the files can cause the device
to crash. Mio is not responsible for product quality
caused by file deletion.
•
Charge only: You will be able to continue using
your device with the battery in charging mode via the
computer.
Registering your Cyclo device with MioShare
1.
Go to MioShare to download and install
computer.
2.
Connect your Cyclo device to the computer and select
Connect to PC.
3.
Open CycloAgent and click My Device > Register to start
synchronising data with the MioShare website.
✎
For the detailed information on using CycloAgent, refer to the CycloAgent
documentation.
Installing the device
CycloAgent
to your
7
Mounting the device on your bike
The
bike mount kit
includes two types of
rubber pads, allowing you to attach the bike
mount to your bike securely.
1.
Select the rubber pad that best fits the handle bars on your
bike and then attach it using the two plastic straps.
2.
Align the latch on the back of the device with the slot on the
bike mount, and then rotate the device clockwise to lock the
device to the bike mount.
You can choose to mount the device on the handlebar or
on the stem. See the following figure for the examples of
mounting the device.
✎
To remove the device from the bike mount, rotate it counterclockwise.
Advertisement
Table of Contents
