Table of Contents
Advertisement
Getting started
Charging the battery
Your device has an internal battery that may not be fully charged
when you purchase it. You should charge the battery for at least
8 hours before you start using it for the very first time.
To charge the battery, use the supplied USB cable to connect
the device to a computer, USB charger or power adapter (not
supplied).
✎
Caution! For optimal performance of the lithium battery, note the following:
• Do not charge the battery where the temperature is high (e.g. in direct
sunlight).
• Failure to follow the battery usage instructions could cause damage to
your device, battery and even bodily injury or property damage and will
void the warranty.
• When storing the product for a long period of time, charge the battery to
50% – 80% capacity to prevent excess discharge.
Performing the initial start-up
1.
Mount the device and accessories on to your bike. For more
information, see the "Installing the device" section.
2.
Press and hold the
3 seconds
to turn your device on.
POWER
button for
3.
Follow the prompts to personalise your device, including:
•
Select your preferred language.
•
Set the date and time.
•
Set the units format.
•
Create your user profile.
✎
You can change these settings while using the device by tapping
Main menu > Settings.
4.
Activate the map.
Enter the
box) and then tap
have to do this the first time you use the device.
5.
Once your device is turned on, it will search for satellite
signals automatically. This may take several seconds
depending on the location.
When GPS is fixed, the GPS signal icon (
indicates the GPS status.
Connecting your device to the computer
1.
Turn on the computer.
2.
Turn on your device.
3.
Connect the Micro-USB end of the USB cable to the back
of your device and the other end to a USB port on your
computer.
4.
Select the desired connection type from the pop-up message
window:
•
Connect to PC: Your device will be recognised as
two external mass-storage drives: Mio_system and
Mio_data. You can use Windows File Explorer to copy/
3 SEC
move the files from the computer to your device. A USB
6
Startup Key
(which is printed on the bottom of the
OK
to unlock your device.
You will only
) on the screen
Advertisement
Table of Contents
