Sandstrom S1DVD11E Quick Start Manual

Quick Start Guide
DVD Player with HDMI
TM
S1DVD11E
Thank you
for purchasing your new
Sandstr m DVD Player.
Ø
Please follow this quick start guide for a
successful first time set up.
We recommend that you spend some
time reading the instruction manual in
order to fully understand all the opera-
tional features it offers.
Read all the safety instructions carefully
before use and keep the instruction
manual for future reference.
1
Unpacking
Remove all packaging from the DVD player. Retain the packaging.
If you dispose of it please do so according to any local regulations.
DVD Player x 1 Remote Control x 1
Instruction Manual x 1 Quick Start Guide x 1
2
Operating Your Remote Control
1. Press and lift the back cover
up to open the battery
compartment of the remote
GB
control.
2. Insert two AAA size batteries
(not supplied).
Install the batteries correctly by
following the polarity (+ and -)
indications in the battery
compartment.
3. Close the battery compartment
cover.
Danger of explosion if battery is
incorrectly replaced. Replace
only with the same or equivalent
type.
3
Connections
Television
Method 1
HDMI cable
DVD/USB
1 2 3
OSD
4 5 6
SUBTITLE
7 8 9
SEARCH
TITLE
0 10+
REPEAT A-B RPT CLEAR ANGLE
SETUP MENU
ZOOM PROG
F.REV F.FWD PREV NEXT
PAUSE/STEP STOP AUDIO MUTE
/
VOLUME
Television
White Red Yellow
To audio inputs of the ampli er
To SCART input
Method 2
SCART cable
To SCART output
Stereo system
White Red Yellow
Method 4
COAXIAL cable
To COAXIAL type
digital audio input
Method 3
AUDIO cable
4
Connecting to the Mains Socket
1. Plug in the mains plug into 2. Press the STANDBY / ON
the mains socket after you button on the remote control to
have completed all the switch on the DVD player.
connections.
DVD/USB
OSD
SUBTITLE
TITLE
REPEAT
SETUP
ZOOM
F.REV
PAUSE/STEP
/
3. Turn on the TV, select the video
input connected to the DVD
player.
5
Basic Playback
1. Press the OPEN/CLOSE button to open the disc tray, place a
disc with the label facing up.
2. Press the OPEN/CLOSE button again to close the disc tray.
3. If the disc does not start playing automatically, press the
ENTER/PLAY button.
4. Some discs may start playback with a menu. Use the
buttons on the remote control to select menu options and press
the ENTER/PLAY button to start, or press digits to select a
menu options directly.
5. To eject the disc, press the OPEN/CLOSE
If you have any difficulties, please refer to the instruction manual.
You will find that there are many exciting features available.
Tip:
To get to know all these features, please take some time to read
the instruction manual provided.
1 2 3
4 5 6
7 8 9
SEARCH
0 10+
A-B RPT CLEAR ANGLE
MENU
PROG
F.FWD PREV NEXT
STOP AUDIO MUTE
VOLUME
button.
(P.N.: 1-3010-A813-0000-R)