Operation; Weighing; Incremental Weighing; Changing The Measuring Unit - Silvercrest HG04426A Operation And Safety Notes

Operation

Set the product on a solid, level and flat surface
to weigh.

Weighing

Note: Always place the object you wish to weigh
gently onto the weighing surface
ing the glass surface.
Briefly touch the button
the product. The LC display
plays for approx. 2 seconds.
Note: A slight touch of the button
and the button UNIT
product. If there is too much pressure, the
product may cause tilting.
During this time the weighing equipment on the
product is adjusting. Afterwards the numerical
display will read "0". The unit display
7
show the last unit selected.
Note: if an object (e.g. a key) is already on the
weighing surface
numerical display
Place the item you wish to weigh onto the product.
The numerical display
the item you are weighing.

Incremental weighing

Touching the button
on will change the numerical display
reading to "0". The "TARE" symbol
Now add another item to weigh onto the product.
The numerical display
the newly added item.
If you remove the item added to the product, the
numerical display
18 GB/IE
to avoid damag-
1
/ TARE to switch on
3
will show all dis-
2
/ TARE
is sufficient to operate the
4
while switching on, the
1
will still read "0".
7
will show the weight of
7
/ TARE with the product
3
from the
7
will appear.
10
will show the weight of
7
will again read "0".
7
If you remove all items from the product, the LC
display
by the minus symbol
Then briefly touch the button
"TARE" symbol
Important! Be sure never to add more than 5 kg
to the weighing surface
product can damage it.

Changing the measuring unit

The product will display the weight in the official Euro-
pean measuring unit "g" (grams), as well as the tradi-
tional unit of weight "oz" (ounce, 1 oz ≈ 28.35 g) or
3
"lb'oz" (pound: ounce, 1lb = 16 oz ≈ 453.59 g).
When measuring the volume of water, the product
calculates it by the weight using the official European
unit of volume "ml" (millilitres) or the traditional unit of
measure fl'oz (fluid ounces, 1fl'oz ≈ 28.41 ml).
will To switch the unit of measure, briefly touch the UNIT
8
button . After each time it is touched, the unit
4
display will switch to the next unit listed:
8

Switching off

Holding the button
seconds will off the product. If no movement is de-
tected on the weighing surface
no button is pressed, the product will automatically
switch off.

Troubleshooting

= Fault
= Cause
= Solution
will show a negative value indicated
2
.
9
/ TARE
will disappear.
10
. Overloading the
1
g → oz → lb'oz → ml → fl'oz
/ TARE
3
1
, and the
3
for approx. 1–2
for 2 minute and