Advertisement
Your unit has two different cooking modes: POWER and TEMP
Professional cooks will appreciate the special features and advantages of each mode.
IMPORTANT: YOU CAN SWITCH BETWEEN POWER AND TEMP AT ANYTIME
JUST BY PRESSING THE POWER/TEMP BUTTON.
Cooking Process for POWER mode
1.
The induction cooker is on when you press the button ON/OFF. The cooker is immediately in operation. The
illuminated indicator opeeration lights means the energy is being transferred to the pan.
2. Press
or
buttons to reduce or increase heating power.
3. The inductive power depends on the posistion of the light:
• Posistion WARM: minimum power
• Posistion HIGH: maximum power
•
Due to the following characteristics the operator must be more attentive when using the induction cooker than
it would be required with other appliances. The heat storage capacity of this system is very low. If the heating
level is changed, the food is immediately exposed to a different temperature. DO not put any empty pans on
the glass ceramic cooking zone, first put grease or liquid into the pan and start the cooking process afterwards.
Empty pans and pots heat up very quickly. Carefully adjust the heating level to the required cooking mode.
•
The pan should always remain in the centre of the heating area, otherwisem the bottom of the pan is heated up
unequally and the food inside the pan may become burnt. When heating up oil or grease, constantly check the
pan to prevent oil abd grease from overheating and burning.
•
If you take the pan away from the heating area, power transfer to the pan stops immediately. If the pan is put
back on the heating area, the selected power will be transferred to the pan again.
•
After switching the cooker to the off posistion the cooking will stop.
CAUTION: IF NO PAN OR AN IMPROPER PAN IS ON THE COOKING AREA,
THE COOKER WILL SHUT OFF AFTER 60 SECONDS.
Cooking Process for TEMP mode
When your recipe requires a precise and even temperature to be maintained over a period of time the TEMP mode
is ideal, Just follow these simple steps:
1.
Press the POWER/TEMP button, the cook mode to transfer to TEMP mode.
2. The TEMP indicator light will flash, you can press the
temperature.
3. When the measure dtemperature reaches the desired volume, the TEMP mode indicator light will keep on. The
machine will keep this temperature.
Timer Function
4. The TIMER screen does not display at the beginning.
5. You can press the
max setting time is 99 minutes.
6. The display number on the screen is the reamaining time.
7.
When the time reaches 0 the cooker will turn off.
8. If you press the ON/OFF button at any time the cooker will turn off, even if the timer has not reached 0.
NOTE: IF THE UNIT IS LEFT ON AND HAS BEEN LEFT UNATTENDED FOR 120
MINUTES WITHOUT ANY OPERATION, THE UNIT WILL SHUT OFF IMMEDIATELY.
OPERATION
or
buttons to reduce or add the desired cooking time. One push is for one minute. The
or
buttons to reduce or add the desired cooking
Advertisement
