Download Print this page

Grounding Instructions; Electrical Installation Requirements; Operation Test - Delta ESM15 Operation Manual

Advertisement

1.
The cooker must be properly grounded. In the event of an electrical short circuit, grounding reduces the risk
of electric shock by providing a safe path for the electric current. The cooker has a power cord with a 3–prong
grounding plug, which must be used in a compatible and properly rounded outlet. It is the owners responsibility
to replace any 2–prong wall outlet with a properly grounded 3–prong wall receptable.
2. For your safety, never cut, remove, or disable the electrical ground connection from the plug. Never use an
adapter plug or an extension cord with the cooker.
ELECTRIC SHOCK CAN RESULT FROM AN IMPROPERLY GROUNDED PLUG.
PLEASE CONSULT A QUALIFIED ELECTRICIAN IF YOU HAVE ANY QUESTIONS

ELECTRICAL INSTALLATION REQUIREMENTS

Every installation site has different electrical wiring. Because many different local codes exist, it is the owner and
installers responsibility to comply with those codes. The manufacturor is not responsible for any consequential
damages as a result of failure to comply with installation requirements.
• Remove vooker carefully from carton.
• Remove all loose packaging and accessories.
• It is the responsibility of the instaler to comply with all local codes.
• Any installation not matching the specifiactions stated in this manual automatically voides the product's
warranty.
• The manufacturor recommends that a dedicated electrical line be used for eachproduct installed. Electrical
circuits should not be shared with any other electrical equiment.
CAUTION: THE GLASS CERAMIC COOKING ZONE IS WARMED UP FROM THE
HEAT OF THE PAN. TO AVOID INJURIES/BURNING DO NOT TOUCH THIS AREA.
TIMER
• Use a pan that is suitable for induction cooking, having a bottom diameter of at least 12cm.
• Put some water in the pan and place it in the center of the heating area.
• Push the button ON/OFF, the indicator will illuminate lights and the water will be heated.
• Take the pan away from the heating area, the unit will pause working.
• Place the pan back on the heating area, the heating process will continue.
• Push the button ON/OFF again, and the machine will stop working.
If the operations remains off, check the following:
• Is the cooker connected to the outlet?
• Do you use a suitable pan (bottom diameter at least 12cm and made of suitable material)?
• Is the pan placed in the venter of the heating area?

GROUNDING INSTRUCTIONS

ABOUT THESE GROUNDING INSTRUCTIONS.

OPERATION TEST

POWER
TEMP
POWER
TEMP
WARNING:
WARM
LOW
MID
HIGH
ON/OFF

Advertisement

loading