MD SPORTS SOC042_028M Assembly Instructions Manual page 5

SOC042_028M PARTS LIST
FOR FIG. 6
A9
4x35mm Screw
FOR FIG. 14
A13
3x18mm Hardened Screws
SOC042_028M PRE-INSTALLED PARTS
FOR FIG. 2
P1
Plastic Rod Bushing
ASSEMBLY INSTRUCTIONS:
1. Find a clean, level place to begin the assembly of your product.
2. Remove all the parts from the box and verify that you have all of the listed parts as shown on the parts list pages.
Carefully cut or tear the four corners of the box so that the bottom of the box can be used as your work surface.
2 X 1
A7 X 4
SOC042_028M
A10
x4
P3x18mm Screw
A14
x18
3/16" Nut
P2
x12
Plastic Ball Entry Rim
FIG. 1
(Continued on the next page.)
FOR FIG. 15
A11
x4
1/4"x1-1/4" Bolt
FOR FIG. 9, 11
A15
x4
Wrench
FOR FIG. 2
P3
x2
Leg Cap
2
Note: Please note the hole
and the hole alignment.
4
FOR FIG. 2, 5
A12
x8
x1
FOR FIG. 13
x4
2
A7
The Hole
FOR FIG. 16
x8
4x12mm Screw
www.themdsports.com