Page 1
TPD-283-H/283U-H Quick Start v1.1, Jan. 2019 What’s in the box? Thanks for buying ICPDAS TPD 2.8 inch H series device. This shipping package contains the following items: TPD-283-H/283U-H x 1 Quick Start x 1 (This Document) Related Information If you are new to TPD-283-H/283U-H, please read the “Chapter 3.
Earth DC input Voltage (range: +12 V ~ +48 V) Connected to the power supply’s ground pin Data+ The positive data line of the RS-485 network Data- The negative data line of the RS-485 network Technical support: service@icpdas.com...
Page 3
TouchPAD device through Ethernet. Run Only Run the program. USB Force Update a new application to the TouchPAD Update device through USB. Network Default Settings IP Address 192.168.255.1 Subnet Mask 255.255.0.0 Gateway 192.168.0.1 Technical support: service@icpdas.com...
3. Try to touch on the icons on the bottom-right corner of the screen of the TPD-283-H/283U-H and you can find that TPD-283-H/283U-H switches to the setting pages. Hardware Installation External Wall Box, EWB-T28 (optional) Outlet Box, OB120 (optional) Technical support: service@icpdas.com...
Page 7
No 模式 說明 執行/更新程式,用於程式開發階段 (能 Run & Update 執行程式,也能進行更新)。(出廠預設) (Ethernet) 強制更新,當 TouchPAD 上的程式嚴 Ethernet Force Update 重毀損時可用此模式透過 Ethernet 更 新。 執行程式。 Run Only 透過 USB 更新程式。 USB Force Update 網路設定出廠預設如下表: IP Address 192.168.255.1 Subnet Mask 255.255.0.0 Gateway 192.168.0.1 Technical support: service@icpdas.com...