ICPDAS TPD 2.8" H Series Quick Start Manual page 3

3
Rotary Switch & Default Settings
The definition of the rotary switch (TPD-283-H):
No Mode
0
1
2
The definition of the rotary switch (TPD-283U-H):
No Mode
0
1
2
9
Network Default Settings
IP Address
Subnet Mask
Gateway
Technical support:
Description
This is a special run mode which is used in
Run &
the development stage. The TouchPAD
Update
device can be updated by a PC from the
remote side through Ethernet. (Default)
While the application run on the TouchPAD
device seriously crashes, use this mode to
Force
update a new application to the TouchPAD
Update
device through Ethernet.
Run Only Run the program.
Description
This is a special run mode which is used in
Run &
the development stage. The TouchPAD
Update
device can be updated by a PC from the
(Ethernet)
remote side through Ethernet. (Default)
Ethernet While the application run on the TouchPAD
Force device seriously crashes, use this mode to
Update update a new application to the TouchPAD
device through Ethernet.
Run Only Run the program.
USB Force Update a new application to the TouchPAD
Update device through USB.
192.168.255.1
255.255.0.0
192.168.0.1
service@icpdas.com P3