Advertisement
Quick Links
What's in the box?
Thanks for buying ICPDAS TPD-433F-H device. This shipping
package contains the following items:
TPD-433F-H x 1
Related Information
If you are new to TPD-433F-H, please read the "Chapter 3. Getting
Started" of the TouchPAD Hardware User Manual for detailed
information about install the free development tool – HMIWorks and
how to create your first project.
Documents, such as the User Manuals, the API References,
etc.:
http://ftp.icpdas.com/pub/cd/touchpad/document/
Free Development Software, HMIWorks v2.10.10 or above:
http://ftp.icpdas.com/pub/cd/touchpad/setup/
If you have any questions, please feel free to contact us via email.
Technical support:
TPD-433F-H Quick Start
Quick Start x 1
(This Document)
service@icpdas.com
v1.1, Jan. 2019
M 2.6 x 12 L Round
Head Screws x 4
P1
Advertisement
Related Manuals for ICPDAS TPD-433F-H
Summary of Contents for ICPDAS TPD-433F-H
- Page 1 (This Document) Head Screws x 4 Related Information If you are new to TPD-433F-H, please read the “Chapter 3. Getting Started” of the TouchPAD Hardware User Manual for detailed information about install the free development tool – HMIWorks and how to create your first project.
-
Page 2: Pin Assignments
Connected to the power supply’s ground pin The positive data line of the RS-485 network The negative data line of the RS-485 network Ground pin TxD2 The pin of transmitted data of the RS-232 RxD2 The pin of received data of the RS-232 Technical support: service@icpdas.com... - Page 3 255.255.0.0 Gateway 192.168.0.1 First Use of the TPD-433F-H 1. Connect wires as the below figure or prepare an Ethernet cable which will be used to supply power through PoE if there’s a RJ-45 Ethernet port on it. And set the rotary switch to 0 (At this point, the power is not yet supplied).
-
Page 4: Hardware Installation
3. Try to touch on the icons on the bottom-right corner of the screen of the TPD-433F-H and you can find that TPD-433F-H switches to the setting pages. Hardware Installation... - Page 5 感謝您購買泓格的 TPD-433F-H 產品。產品包裝內應包含下列配件: 產品須知 x 1 (本文件) TPD-433F-H x 1 M 2.6 x 12 L 圓頭螺絲 x 4 參考資訊 如果您是第一次使用 TPD-433F-H ， 請參閱 TouchPAD 硬體使用手冊 的 “第 3 章 啟動 TouchPAD” 來了解如何安裝免費的開發軟體 HMIWorks 並建立第一個專案以及更多詳細的相關資訊。 相關文件，如使用手冊、應用程式介面指南(API Reference) 等: http://ftp.icpdas.com/pub/cd/touchpad/document/ 免費開發軟體，HMIWorks 版本 2.10.10 或以上版本: ...
- Page 6 LED 指示燈 序列埠 蜂鳴器 Ethernet 重啟按鈕 旋轉開關 4.3 吋觸控液晶螢幕 腳位定義 說明 機架接地，F.G. (連接到內部的 EMI 或 ESD 保護電路)， F.G. 請接到大地 直流電壓輸入 (範圍：+12 V ~ +48 V) 連到電源的接地端 RS-485 網路的正訊號線 RS-485 網路的負訊號線 接地端 RS-232 的傳送資料腳位 TxD2 RS-232 的接收資料腳位 RxD2 Technical support: service@icpdas.com...
- Page 7 Ethernet Force Update 重毀損時可用此模式透過 Ethernet 更 新。 執行程式。 Run Only USB Force 透過 USB 更新程式。 Update 網路設定出廠預設如下表: IP Address 192.168.255.1 Subnet Mask 255.255.0.0 Gateway 192.168.0.1 第一次使用 TPD-433F-H 1. 如下圖所示，將電源和接地線連接完成。或是若有 RJ-45 的乙太網路 接孔，可以準備一條網路線，透過乙太網路供電 (PoE)。然後將旋轉開關 (Rotary Switch) 轉到 0 (此時尚未供電)。 Technical support: service@icpdas.com...
- Page 8 乙太網路供電 VDC (+12-+48 V) 使用一字起子來配置旋轉開關 外部供電器 2. 開始供電給 TPD-433F-H，等待約數秒 的開機時間，接著可以看到 TPD-433F-H 執行出貨預附的程式如左圖所示。 3. 試著按一下 TPD-433F-H 螢幕上面的圖示，TPD-433F-H 會切到其他 的頁面。 硬體安裝 TPD-433F-H 安裝於專用明盒 TPD-433F-H 安裝於專用暗盒 EWB-T43F(選購) OB140F (選購) Technical support: service@icpdas.com...