Acurus Muse Operating Manual And Installer Manual page 31

Network Connection Status:
right corner of the MUSE home screen) shows whether or
not the MUSE Ethernet link is active. The button is dimmed
(inactive) when the network is not detected and glows
(active) when the network is detected.
Note that "connected" status only means that the MUSE is
connected successfully to a network router or switch and
does not necessarily mean that the MUSE has a live data
connection to the Internet or any other particular control
device. IP and other protocols must be setup properly for
control connections to work but a "connected" status
indication is a critical first step.
Network Quick Connection Assistant:
indicator on the home screen whenever a network
connection is active to bring up the network quick
connection assistant screen as shown below.
Factory Reset
If needed, the MUSE can be completely reset to factory
default settings using the factory reset function here.
Document 1000905
This indicator (on the lower-
Touch the above
Acurus MUSE pre-amp processor USER GUIDE
Factory Reset Button: Press the factory reset button to
restore the MUSE to its factory default settings. To prevent
unwanted noises or pops, be sure any downstream
connected power amplifiers or other outputs are turned off
before a factory reset operation is performed.
During the reset process, a "rebooting" message appears as
shown below. The reset can take up to 2 minutes to
complete.
30
Revision 20190227