Deluxe
Installation Instructions:
e Deluxe Showerwise comes preassembled.
It is not necessary to disassemble the system to install it.
1.
Remove your existing showerhead from the shower pipe.
2.
Turn shower water on to ush out sediment and
particles. Turn water o .
3.
Attach Showerwise System to shower pipe by hand
tightening. Avoid cross threading when starting threads.
Do not overtighten.
4.
Flush with HOT water for several minutes before first use.
5.
Add Te on tape (small roll included) to male threads of shower
pipe if leaks occur.
NOTE: To ensure top performance, change lter
cartridge after 1 year or 15,000 gallons, whichever
comes rst. Replacement Filter Item #1197
Deluxe Showerwise
Massage Head:
NOTE: You may use another head (handheld)
if the ow rate is 2.5 gpm or less
6-Jet Massage Action
n
Adjustable Settings from Soft to Forceful
n
Higher Consistent Flow for Lower Pressures
n
Corrosion Resistant—High Impact White ABS Body
n
Chrome Plated Brass Coupling
n
Meets and Exceeds ANSI Speci cations
n
Certi ed Canadian Standards Association
n
Flow Rate: 2.5 gpm at 80 psi
n
Replacement Head Item #1057
© 2007 Waterwise Inc
Filter
Housing
(top)
KDF-55
®
and Chlorgon
®
Filter
Cartridge
Filter
Housing
(bottom)
Deluxe
Showerwise
Multi-Jet
Adjustable
Massage
Head
Form 1193 • Rev 05/14