Waterwise Showerwise Deluxe Installation Instructions

Deluxe
FILTRATION SYSTEM

Installation Instructions

1. The Deluxe Showerwise comes preassembled.
It is not necessary to disassemble the system to install it.
2. Remove your existing showerhead from the shower pipe.
3. Turn shower water on to flush out sediment and
particles. Turn water off.
4. Remove protective wrap from Showerwise System.
5. Attach Showerwise System to shower pipe by hand
tightening. Avoid cross threading when starting threads.
Do not overtighten.
6. Flush with HOT water for several minutes before first use.
7. Add Teflon plumber's tape to any male threads if leaks occur.
NOTE: To ensure top performance, change filter
cartridge after 1 year or 15,000 gallons, whichever
comes first.
Deluxe Showerwise
Massage Head
n
6-Jet Massage Action
n
Adjustable Settings from Soft to Forceful
n
Higher Consistent Flow for Lower Pressures
n
Installs Easily by Hand—Self-Sealing Threads
n
Corrosion Resistant—High Impact White ABS Body
n
Chrome Plated Brass Coupling
n
Non-Aerating Spray Means Less Water Temperature
Loss
n
Meets and Exceeds ANSI Specifications
n
Certified Canadian Standards Association
n
Flow Rate: 2.5 gpm at 80 psi
Filter
Housing
(top)
KDF-55 ®
®
and Chlorgon
Filter
Cartridge
Filter
Housing
(bottom)
Deluxe
Showerwise
Multi-Jet
Adjustable
Massage
Head