User Maintenance - Conair Unbound CR510 Instruction And Styling Manual

USER MAINTENANCE

Your styler is virtually maintenance free. No lubrication is needed. Keep all vents and openings clear of
dirt and dust. If cleaning becomes necessary, disconnect the unit from the power source, allow to cool
and wipe exterior with a cloth. If any abnormal condition occurs, unplug the unit, allow it to cool, and
return it for repair to an authorized service representative only. No repairs should be attempted by
the consumer.
NEVER allow the USB charging cord to be pulled, twisted, or severely bent. Never wrap the cord tightly
around the appliance. Damage will occur at the high flex point of entry into the appliance, causing it to
rupture and short circuit. Inspect the cord frequently for damage. Stop use immediately if damage is
visible or if unit stops or operates intermittently.
CAUTION
This appliance comes with a heat-resistant storage pouch for use during and after styling. During use,
do not place the appliance on any heat-sensitive surface, even when using the storage pouch provided.
After use, switch off and unplug the appliance. Immediately wrap the appliance in the storage pouch
provided and allow to fully cool down. Do not jerk or strain cord at plug connections. Do not wrap the
line cord around the appliance. Allow the cord to hang or lie loose and straight at the point of entry into
the appliance. Continue to keep it out of the reach of children, as it will remain hot for several minutes.
Store out of reach of children in a safe, dry location.
IMPORTANT! The outer material is not heat resistant and the appliance should not be placed on this
material while hot.
STORAGE