Advertisement
15. Treble Control: Turn this knob to adjust the high frequencies of Channel 1
and Channel 2.
16. Bass Control: Turn this knob to adjust the low frequencies of Channel 1
and Channel 2.
17. LED DIMMER: Adjusts the blue lights and blue rings.
18. SUB. OUT VOLUME CONTROL
19. ECHO CONTROL: Turn the knob to adjust the MIC echo level.
20. MIC VOLUME: Adjust the volume level. Turn the knob clockwise to increase
the MIC volume.
21. MIC INPUT JACKS 1&2: Connect KARAOKE MIC to these jacks.
22. HEADPHONE JACK: Connect Headphone to this jack.
23. AUX 1 Input
24. Dual USB Charge (5V/2A): Charge for Mobile-phone
25. POWER SWITCH: Press to switch the power unit ON or OFF
26. TUNER ANT: Connect for AM/FM antennas.
27. AUDIO INPUT JACKS: Connect the audio output jacks of DVD/CD. AUX to
these jacks.
28. SUB-WOOFER OUTPUT JACKS 1 & 2: Connect IPOD/MP3 to this jack.
29. LINE OUTPUT JACKS: Connect the line input jacks to these jacks.
30. A SPEAKER OUTPUT TERMINALS: Connect your speaker system to these
terminals.
31. B SPEAKER OUTPUT TERMINALS:
Connect your the other speaker system(s) to these terminals.
32. COOLING FAN
33. 115V/230V SWITCH: According to power voltage, push this button to the
station of the 115V or 230V.
34. POWER CORD: Connect to AC 115V/60Hz & 230V/50Hz outlet.
4
www.PyleUSA.com
2. USB/SD Card Control Console Display Screen
1. Mode Displayed
"USB" or "SD" letters will be displayed here if the "MODE" button is switched
to USB mode or SD mode.
2. The current playing Music's name will be displayed here.
3. The playing time of the current music will be displayed.
4. The number of the music will be displayed.
5. Formats like Mp3, WAV, WMA, APE, FLAC, etc.will be displayed.
6. "Fm Radio" be displayed if the "MODE" button is switched to FM Radio mode.
7. The current FM Frequency is displayed here
8. The current FM Channel will displayed here
MARK 1: There will be 6 diferent EQ that will be displayed on the screen
depending on the selected setting: Hall, Live, Jazz, Rock, Pop, Normal.
MARK 2: USB/SD Card/BT Control Console: After inserting a USB ash drive/
SD Card into the input terminal, be sure to set the input selector to USB/SD,
then press the mode button to choose between audio from the USB Port, SD
Card input, BT or FM radio. If you want to use the BT, check the steps for
connecting with BT device.
5
www.PyleUSA.com
Advertisement
