Table of Contents
Advertisement
Quick Links
Hardware (Included)
1 – 5mm Allen wrench
6 – 25mm screws
4 – 10mm screws
1
Install Casters & Cylinder
Firmly press all casters into base.
Set cylinder into base.
3
Install Seat & Back Assembly
Place seat assembly upright and onto base assembly.
Replacement Instructions
Mech Install
Install two 25mm screws on front of mechanism. Install
two 35mm screws on rear of mechanism.
People
1 Person
Time
10 - 15 minutes
2
Install Arms
Install six 25mm long screws to attach arms.
4
Install Headrest
Loosen headrest clamp screws. Then attach headrest
clamp around the back lip of the chair and tighten
screws. Ensure headrest is tight.
Back Install
Install three 40mm screws to secure backrest.
Icon™ Installation Guide
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Neutral Posture Icon
Summary of Contents for Neutral Posture Icon
- Page 1 Icon™ Installation Guide Hardware (Included) People 1 – 5mm Allen wrench 1 Person 6 – 25mm screws Time 10 - 15 minutes 4 – 10mm screws Install Casters & Cylinder Install Arms Firmly press all casters into base. Install six 25mm long screws to attach arms.
- Page 2 Depress the button on the inside of the arms to adjust Adjust lumbar by simply sliding backpiece up and down. height. Seat Slider Headrest Pull lever up to adjust seat depth. Headrest adjusts vertically. 979.778.0502 979.778.0408 • NeutralPosture.com 06/2016 © 2016 Neutral Posture, Inc. All rights reserved.
Need help?
Do you have a question about the Icon and is the answer not in the manual?
Questions and answers