Assembly Instructions
ABT-AEC
PL 71 (4,2 TDI)
3. Preparations at the vehicle
Remove the windscreen wipers, the engine hood seal and loosen the
plastic cover beneath the front screen. Remove the anti-theft device if
necessary.
p. 8/19
The Picture shows the engine
control units. Only the ecu on the
left side (arrow) is affected.
On the driver´s side remove the
cellular rubber which is separating
the water tank from the motor
compartment.
Remove the marked screw. The
screw is needed for the re-
installation.
Attention while working on the
plus terminal. If necessary
disconnect the battery.
Abt Sportsline GmbH