Table of Contents
Advertisement
Assembly Instructions
ABT-AEC
PL 71 (4,2 TDI)
p. 12/19
Disconnect the external ecu from
the original wiring harness (see
arrow). Connect the ABT wiring
harness with the ecu.
Connect the male multipont
connector of the ABT wiring
harness with the original wiring
harness. Place it like shown in the
picture.
Place the ABT wiring harness
along the partition panel. Fix the
wiring harness with cable ties.
The picture shows the view on the
passenger´s side.
Abt Sportsline GmbH
Advertisement
Table of Contents
