Advertisement
How to update your wireless loudspeakers via BeoLab Transmitter 1
To make a software update of your wireless loudspeakers via BeoLab Transmitter 1, you must use a USB memory
stick and a computer.
1. Prepare a USB memory stick ...
> Make sure that the USB memory stick is formatted with FAT16 or FAT32.
> Insert the USB memory stick in the USB socket on your computer.
> Select 'DOWNLOAD SOFTWARE'.
> Extract the contents of the zip file to the root of your USB memory stick.
2. Prepare your wireless loudspeakers ...
> Make sure that all loudspeakers are switched on and that the role switch of the loudspeakers is set to 'wireless'.
3. Switch off BeoLab Transmitter 1 ...
> Disconnect BeoLab Transmitter 1 from the mains for at least 60 seconds.
4. Insert the USB memory stick in BeoLab Transmitter 1 ...
> Insert the USB memory stick in the socket marked USB-A on BeoLab Transmitter 1.
The USB-A socket is placed in the middle of the connection panel on BeoLab Transmitter 1.
5. Update software on BeoLab Transmitter 1 and your wireless loudspeakers ...
> Reconnect BeoLab Transmitter 1 to the mains.
> BeoLab Transmitter 1 may restart, during which the product status indicator is solid red for some seconds.
> The software update starts automatically. Do not disconnect from the mains.
> The product status indicator flashes green during the software update.
The product status indicator is placed on the front of BeoLab Transmitter 1.
> Each loudspeaker flashes green while it is being updated, then switches off. The update can take up to 10 minutes for each speaker*
> When BeoLab Transmitter 1 and all wireless speakers have been updated, BeoLab Transmitter 1 restarts automatically. The product status
indicator is solid red for some seconds, then switches off.
6. Switch off BeoLab Transmitter 1 before removing USB memory stick ...
> Disconnect BeoLab Transmitter 1 from the mains for at least 60 seconds.
> Remove the USB memory stick from BeoLab Transmitter 1.
> Reconnect BeoLab Transmitter 1 to the mains.
If an error occurs (the product status indicator flashes orange) ...
> Disconnect BeoLab Transmitter 1 and all wireless loudspeakers from the mains for at least 60 seconds.
> Reconnect all loudspeakers to the mains.
> Reconnect BeoLab Transmitter 1 to the mains.
> Perform the software update again, from step 3.
*The PL status indicators on the connection panel of BeoLab Transmitter 1, also show the progress of the software update. The PL status
1
indicators light up for each loudspeaker found (red or white) and when a loudspeaker is being updated, the corresponding PL status indicator
flashes red or white. When the update of the loudspeaker is complete, the PL status indicator switches off.
.
1
Advertisement
