Sony FD Trinitron WEGA KV-32HS20 Operating Instructions Manual page 57

Other Information
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
Sony
Switch Position Programmable
Equipment on Remote Control Code Number
Beta, ED Beta VCRs
AVl
303
8 mm VCR AV2 302
VHS VCR AV3 301
DVD Player
DVD
751
If you have video equipment other than Sony brand that you want to
control with the TV's remote control, use the following procedures to
program the remote control.
-a
--al
--f2J
---@I
-"a
From the "Manufacturer's Codes" listed on page 52, select the three-
digit code number for the manufacturer's code for your equipment. If
more than one code number is listed, start with the number listed
first. Use the code number to complete the following procedure.
1
Move the slide switch to the desired equipment type.
2 Press CODE SET.
3 Press the white function button for the type of equipment you
want to control with the TV's remote control (VCR/DVD or
SAT/CABLE).
4 Enter the three-digit manufacturer's code number.
5 Press ENTER.
6
To check if the code number works, aim the TV's remote control
at the equipment and press the green POWER button that
corresponds with that equipment. If it responds, you are done. If
not, try using the other codes listed for that manufacturer.
50