Sony FD Trinitron WEGA KV-32HS20 Operating Instructions Manual page 11

Introducing r:he FD Trinitron Wega
The following table describes the buttons on the remote control that
are for more advanced functions.
Button Descriptions
Button
q
MUTING
@ PICTURE MODE
q
DRC MODE
q
JUMP
q
TV/VIDEO
q B
a VOL +I-
q
0
-+-
@ RESET
@ POWER buttons
(GREEN)
$ DISPLAY
q
ANT
Description
Press to mute the sound. Press again or press VOL + to
restore the sound.
Press repeatedly to step through the available video
picture modes: Vivid, Standard, Movie, Pro. Also
available in the Video menu. For details, see
"Selecting Video Options" on page 36.
For high quality sources (i.e., DVD player, Satellite
Receiver), this button cycles through the available
high-resolution picture modes: Interlaced, Progressive.
Also available in the Video menu. For details, see
"Selecting Video Options" on page 36.
Press to jump back and forth between two channels.
The TV alternates between the current channel and
the last channel that was selected.
Cycles through the video equipment connected to
your TV's video inputs: w, VIDEO 1, VIDEO 2, VIDEO 3,
VIDEO 4, VIDEO 5, VIDEO 6.
Turns on/off Twin View. For details, see "Using Twin
View" on page 31.
Adjusts the volume.
Joystick allows for movement of the on-screen cursor.
Pressing down on the center of the joystick selects the
item.
Press when in a menu to reset the settings to the
factory defaults.
Turn on and off the TV and other audio/video
equipment you have programmed into the remote
control. For instructions, see "Programming the
Remote Control" on page 50.
Press once to display the current time and channel
label (if set) and channel number. Press again to turn
Display off. See page 46 for details on setting the time.
Changes between the VHF/UHF input to the AUX
input.
.L
L!l
To scan rapidly through the
channels, press and hold down the
CH+ or CH- button.