Safety Instructions; General Warnings, Cautions And Notes - ABACO MACHINES AWT7523C Operation Manual

III. SAFETY INSTRUCTIONS:

1) General Warnings, Cautions and Notes:

a. Before operations:
Before operation make sure the following:
- All nuts and bolts are tightened securely.
- All four swivel casters are locked safely.
- The Working Table is placed on a flat and smooth surface, not on a
wavy or rough surface.
- The Working Table is in good operating condition.
- The rubber pad are clean, no dust, oil or debris on it.
- Confirm all the welded joints are free from any defects or damage,
such as separation, crack, and so forth.
- Use appropriate PPE (Personal Protective Equipment) to protect
against injury.
b. During operations:
- Make sure the weight of the slabs being placed is within the
specified W.L.L (Refer to the table at page 1).
- Follow the steps and instructions in this operation manual.
- For safety purposes, you (the operator) are responsible for
following all applicable laws and regulations in your region.
c. After operations:
- Clean the Working Table thoroughly after each use.
- Store in a well-ventilated place, avoid places with high heat or
humidity.
Note: See Maintenance Instructions section in this manual for more
details.
AWT7523C - Operation Manual ABACO MACHINES -All Rights Reserved
4