Equipment General Information; Technical Specifications; Dimensions - ABACO MACHINES AWT7523C Operation Manual

I. EQUIPMENT GENERAL INFORMATION:
- Working Table (AWT7523C) is used to put the stone slab for
grinding, polishing and drilling.
- Linking hooks are designed to create multi-way table layout
arrangements by combination of single tables. (Refer to page 7.)
- Rubber-lined table protects stone slabs from scratches or
damages.
- The design is convenient and efficient, can be assembled to suit
the shape and size of the stone slab.
- With the design of each detachable part should be easy to
disassemble, convenient for moving and repacking.
- It has a high level adjustment at the bottom of the table, helping
to adjust the surface of stone slab to be even.
II. TECHNICAL SPECIFICATIONS:
- AWT7523C is made of square, rectangular steel tubes.
- In addition, it has four swivel casters for being easy to move the
table in any position.

1) Dimensions:

Length (A)
inches (mm)
75 ⁷⁄₈ (1927)
AWT7523C - Operation Manual
Width (B)
inches (mm)
37 ¹⁵⁄₁₆ - 40 ⁹⁄₁₆
23 ¹⁵⁄₁₆ (608)
*
W.L.L: Work Load Limit
Height (C) Net Weight
inches (mm)
(965 - 1030)
ABACO MACHINES -All Rights Reserved
1
W.L.L.
lbs (kg) lbs (kg)
169.4 (77) 4824 (2200)
*