Eastwood 21285 Instructions Manual page 6

ADDITIONAL SAFETY INFORMATION
SET-UP
• Attach the Auxiliary Handle by threading it securely into the tapped holes in either the right
or left side of the gearcase (FIG 1).
DRILL BIT OR ACCESSORY INSTALLATION
This Drill can quickly start up when handling while plugged into an electrical
supply causing serious personal injury. Always unplug the Drill from the
electrical supply before changing bits or performing maintenance.
Sharp drill bit edges and metal can cut. Always wear protective work gloves
while handling.
• Rotate the Chuck counter-
clockwise (as viewed from
the front end of the Drill)
to open Chuck Jaws (FIG 1).
6
• This Drill with attached bits or other accessories can eject a trail of sparks
at high speed which can ignite flammable materials or injure others nearby.
Do not operate in the vicinity of flammable materials and keep all persons
and pets away from the work area.
   " " " "
Eastwood Technical Assistance: 800.343.9353 >> techelp@eastwood.com
FIG. 1
Open
Chuck
Jaws
Close
Auxiliary
Handle