Table of Contents
Advertisement
Instruction Manual Electrobloc EBL 269
4
3
Description and appropriate use
▲
This device is not intended to be used by persons (including children) with
limited physical, sensory or mental aptitude or lack of experience and/or
knowledge unless they are supervised by a person responsible for their
safety or have received instruction from this person as to how the device
is used.
▲
Children are to be supervised so as to ensure they do not play with the
device.
▲
This device is exclusively designed for installation into a vehicle.
The Electrobloc EBL 269 is designed as a main power distibutor for
motorhomes. The Electrobloc is a permanent installation. The Electrobloc is
for charging batteries and supplying 12 V appliances with power.
The electrical management system "Electrobloc" consists of:
●
The LAS 1218 charger module
●
The 12 V distribution
●
Fuses for the 12 V circuits
Other control and monitoring functions
●
The charger module is a primary controlled switch-mode power supply. This
modern switching technology achieves high charging performance at a com-
pact size and low weight.
A control and switch panel has to be connected for operation. This control and
switch panel controls the electrical functions in the living area of the
motorhome, including accessories.
There are connections for an auxiliary charging unit and a solar charge regu-
lator.
1
Fig. 1
Electrobloc EBL 269 front view
1 Mains connection
2 Flat vehicle fuses
3 Battery selector switch
4 Connections block 8
5 Connections block 7
6 Connections block 6
7 Connections block 4: Solar charge regulator
8 Connections block 5: Control and switch panel
9 Connections block 3: Auxiliary charging unit
10 Connections block 2
11 Connections block 1
1)
12 Fuse value
1)
The various types have differing fuse values.
Situation: 25.06.2010
2
12
11
10
9
8
3 4
7
6
5
SDT00294
811.598 BA / EN
Hide quick links:
Advertisement
Table of Contents
