Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for UNV DC550 E Series
Summary of Contents for UNV DC550 E Series
- Page 1 Video Decoders Quick Guide V1.00...
-
Page 2: Packing List
Overview NOTE! This manual describes the device hardware information and installation procedure, and guides you through logging into the Web interface. This series video decoders (referred to as device in this manual) are new generation HD network video decoder terminals. The device is designed for remote video surveillance and can be widely applied in various real-time surveillance applications for monitoring videos remotely in real time. - Page 3 LED description Status Description Flashing The device is starting up. Running LED The device is operating. The device is shut down. At least one alarm, for example, temperature alarm, is present. Alarm LED No alarm is present. A link to the Ethernet Interface is present. NET LED No link to the Ethernet Interface is present.
- Page 4 Interface Quantity Description Used to connect to Ethernet to communicate with the devices on the network, to receive IP camera streams, and to be configured by the client through Ethernet Web interface. interface 10M/100M/1000M/auto-sensing, half duplex/full duplex/auto-sensing, RJ-45 connector. USB 3.0 USB 3.0 interface for upgrading equipment.
-
Page 5: Installing The Device
Installing the Device Preparation 2.1.1 Checking the Device Package Before you install the device, verify the device model and check the components and their quantity against the packing list to make sure all items listed are included in the package. WARNING! Do not remove the dismantlement-preventive seal from the device chassis cover without permission. -
Page 6: Starting Up The Device
NOTE! Equipment grounding shall be properly grounded through the specified grounding terminal.( Starting Up the Device After the cables are connected, connect the device with the power source, and start up the device. Examine the device status according to Table 1-1. Logging In to and Out of the Device You can manage and maintain the device through the Web interface. - Page 7 see the online help by clicking the Help menu. For the first login, you are recommended to change the default login password by selecting Change Password. To log out of the device, you can click the Exit menu and confirm your operation to return to the login page.
- Page 8 Copyright Statement ©2020 Zhejiang Uniview Technologies Co., Ltd. All rights reserved. No part of this manual may be copied, reproduced, translated or distributed in any form by any means without prior content in writing from Zhejiang Uniview Technologies Co., Ltd (referred to as Uniview or us hereafter).
- Page 9 Uniview reserves the right to change any information in this manual without any prior notice or indication. Due to such reasons as product version upgrade or regulatory requirement of relevant regions, this manual will be periodically updated. Disclaimer of Liability ...
- Page 10 Change password regularly: Change your device password on a regular basis and keep the password safe. Make sure only the authorized user can log in to the device. Enable HTTPS/SSL: Use SSL certificate to encrypt HTTP communications and ensure data security.
- Page 11 Ensure good ventilation in the operating environment. Do not cover the vents on the device. Allow adequate space for ventilation. Protect the device from liquid of any kind. Make sure the power supply provides a stable voltage that meets the power requirements of the device.
- Page 12 not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
Need help?
Do you have a question about the DC550 E Series and is the answer not in the manual?
Questions and answers